REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Cut and Join Location |
| *a | 100 mm (3.94 in.) | *b | 180 mm (7.09 in.) |
| *A | for Australia (2016/08-) | - | - |
| *A | for Australia (2016/08-) | - | - |
| *a | 105 mm (4.13 in.) | *b | 180 mm (7.09 in.) |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Spot Weld |
|
Plug Weld |
|
Butt Weld |
|
Body Sealer |
Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.
Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)
| *1 | ROCKER PANEL OUTER | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | for Australia (2016/08-) | - | - |
| *A | for Australia (2016/08-) | - | - |
| *1 | ROCKER PANEL OUTER | - | - |
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.