Home › Vehicle Exterior › BODY PANEL › QUARTER PANEL(for Double Cab)
BM25T0E _01 Vehicle Exterior _030570 BODY WELD POINT _0137634 QUARTER PANEL(for Double Cab) F

BODY WELD POINT  QUARTER PANEL(for Double Cab)  CUT AND JOIN REPLACEMENT SECTIONS  


K109017

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108819

Remove Weld Points
K108820

Remove Weld Points
K108827

Cut and Join Location

K118107

K118108C01
2.833,0.969 3.146,1.167 0.313,0.198 10 false *a
*a 200 mm (7.87 in.) - -


K118109


INSTALLATION


Symbol Meaning
K108821

Spot Weld
K108823

Plug Weld
K108824

Plug Weld
K108825

Plug Weld
K108831

Butt Weld
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Before installing a new part, apply body sealer.

HINT:

Apply body sealer in an even, continuous bead.


K118110

K118111C01
2.833,3.75 2.677,3.75 2.677,3.75 2.583,3.333 false 2.875,3.667 3.188,3.823 0.313,0.156 10 false *1
*1 QUARTER LOCK PILLAR - -


K118112


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.