Heat the double-sided tape remaining on the body with an infrared lamp or equivalent.
Heat the tape to 40 to 60°C for approximately 1 to 2 minutes.
Wipe off the remaining double-sided tape using a clean cloth or equivalent.
If a name plate is installed without thoroughly removing the remaining double-sided tape from the body, the name plate will not adhere properly. Make sure to thoroughly wipe off the double-sided tape.
After cleaning the installation area of the body with degreasing agent, attach the name plate to the position shown in the illustration.
The working environment should be 20°C when installing the name plate. If the working environment is below 20°C, heat the installation area of the body to 20 to 30°C and then install the name plate.
| *1 | HOOD EMBLEM SUB-ASSEMBLY | *2 | BUSH |
| *A | except Model Code #J79 Series, w/o Auxiliary Tank | - | - |
| *1 | BACK DOOR NAME PLATE | *2 | NO. 5 BACK DOOR NAME PLATE |
| *3 | REAR NO. 4 NAME PLATE | - | - |
| ● | Non-reusable part | - | - |
| *A | except Model Code #J79 Series, w/ Auxiliary Tank | - | - |
| *1 | BACK DOOR NAME PLATE | *2 | REAR BODY NO. 1 NAME PLATE |
| *3 | REAR NO. 4 NAME PLATE | - | - |
| ● | Non-reusable part | - | - |
| *A | for Model Code #J79 Series | - | - |
| *1 | BACK DOOR NO. 5 NAME PLATE | *2 | REAR NO. 4 NAME PLATE |
| *3 | REAR NO. 5 NAME PLATE | - | - |
| ● | Non-reusable part | - | - |
| *1 | FRONT FENDER EMBLEM | - | - |
| ● | Non-reusable part | - | - |
BACK DOOR NAME PLATE
| *1 | Boss |
REAR NO. 4 NAME PLATE
except Model Code #J79 Series, w/o Auxiliary Tank:
| *A | w/o No. 5 Back Door Name Plate | *B | w/ No. 5 Back Door Name Plate |
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 52 mm (2.05 in.) | B | 135 mm (5.31 in.) |
| C | 52 mm (2.05 in.) | D | 90 mm (3.54 in.) |
except Model Code #J79 Series, w/ Auxiliary Tank:
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 107.5 mm (4.23 in.) | B | 25.4 mm (1.00 in.) |
for Model Code #J79 Series:
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 14 mm (0.551 in.) | B | 33 mm (1.30 in.) |
REAR NO. 5 NAME PLATE
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 33 mm (1.30 in.) | B | 14 mm (0.551 in.) |
REAR BODY NO. 1 NAME PLATE
| *a | Reference Values | *b | Align with bottom |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 11.6 mm (0.457 in.) | - | - |
NO. 5 BACK DOOR NAME PLATE
except Model Code #J79 Series, w/o Auxiliary Tank:
| *A | w/o Rear No. 4 Name Plate | *B | w/ Rear No. 4 Name Plate |
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 52 mm (2.05 in.) | B | 137 mm (5.39 in.) |
| C | 180.5 mm (7.11 in.) | D | 50.5 mm (1.99 in.) |
for Model Code #J79 Series:
| *A | w/o Rear No. 4 Name Plate | *B | w/ Rear No. 4 Name Plate |
| *a | Reference Values | - | - |
| Area | Specified Condition | Area | Specified Condition |
|---|---|---|---|
| A | 14 mm (0.551 in.) | B | 33 mm (1.30 in.) |
| C | 123.5 mm (4.86 in.) | D | 15.5 mm (0.610 in.) |
FRONT FENDER EMBLEM