Point K, k on the vehicle are asymmetrical.
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Fender Installation Nut | M8 (0.31) |
| B, b | Front Fender Installation Nut | M8 (0.31) |
| C, c | Front Fender Installation Nut | M8 (0.31) |
| D, d | Front Fender Installation Nut | M8 (0.31) |
| E | Cowl Panel Center Mark | - |
| F, f | Radiator Support Installation Nut | M8 (0.31) |
| G, g | Radiator Installation Hole | φ12 (0.47) |
| H, h | Front Fender Installation Nut | M8 (0.31) |
| J | Center Brace Installation Nut | M8 (0.31) |
| K, k | Front Fender Apron Standard Hole | φ10 (0.39) |
| L, l | Hood Hinge Installation Nut | M8 (0.31) |
| *a | Distance between points other than those above | *b | Height from Imaginary Datum Line |
| *c | mm (in.) |
- | - |