for Double Cab
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Body Mounting Hole | φ24 (0.94) |
| G, g | Rear Body Mounting Hole | φ15 (0.59) |
| H, h | Rear Body Mounting Hole | φ11 (0.43) |
| J, j | Rear Body Mounting Hole | φ15 (0.59) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ13 (0.51) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
for Regular Cab
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Rear Body Mounting Hole | φ15 (0.59) |
| G, g | Rear Body Mounting Hole | φ15 (0.59) |
| H, h | Rear Body Mounting Hole | φ15 (0.59) |
| J, j | Rear Body Mounting Hole | φ11 (0.43) |
| K, k | Rear Body Mounting Hole | φ15 (0.59) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ13 (0.51) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
for Regular Cab (for Australia (2016/08-))
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Rear Body Mounting Hole | φ15 (0.59) |
| G, g | Rear Body Mounting Hole | φ15 (0.59) |
| H, h | Rear Body Mounting Hole | φ15 (0.59) |
| J, j | Rear Body Mounting Hole | φ15 (0.59) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
for 2 Door Short Van
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Body Mounting Hole | φ24 (0.94) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | mm (in.) |
- | - |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ13 (0.51) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
for 2 Door Long Van
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Body Mounting Hole | φ24 (0.94) |
| G, g | Body Mounting Hole | φ24 (0.94) |
| H, h | Body Mounting Hole | φ24 (0.94) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | mm (in.) |
- | - |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ13 (0.51) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
for 4 Door Van
Upper Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ14 (0.55) |
| B, b | Body Mounting Hole | φ24 (0.94) |
| C, c | Shock Absorber Installation Hole | φ24 (0.94) |
| D, d | Body Mounting Hole | φ24 (0.94) |
| E, e | Body Mounting Hole | φ24 (0.94) |
| F, f | Body Mounting Hole | φ24 (0.94) |
| G, g | Body Mounting Hole | φ24 (0.94) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |
Lower Face
In cases in which only one dimension is given, left and right are symmetrical.
For symbols, capital letters indicate right side of vehicle, small letters indicate left side of vehicle (seen from rear).
| Symbol | Name | Hole Diameter mm (in.) |
|---|---|---|
| A, a | Front Bumper Side Mounting Bracket Installation Hole | φ13 (0.51) |
| B | Lateral Control Rod Installation Hole | φ16.5 (0.65) |
| C, c | Front Stabilizer Bracket Installation Nut | M8 (0.31) |
| D, d | Leading Arm Installation Hole | φ18.5 (0.73) |
| E, e | Rear Spring Bracket Pin Installation Hole | φ14 (0.55) |
| F, f | Rear Spring Bumper Installation Nut | M8 (0.31) |
| G, g | Spring Shackle Installation Hole | φ40 (1.57) |
| *A | FRONT | *B | LH |
| *C | RH | - | - |
| *a | Distance between points other than those to the left | *b | mm (in.) |