Home › Vehicle Exterior › BODY PANEL › ROOF PANEL(for 2 Door Short Steel Roof Van)
BM25T0E _01 Vehicle Exterior _030570 BODY WELD POINT _0139880 ROOF PANEL(for 2 Door Short Steel Roof Van) F

BODY WELD POINT  ROOF PANEL(for 2 Door Short Steel Roof Van)  ASSEMBLY REPLACEMENT  


K118084

REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108832

Brazing or Arc Brazing for Removal

K118423

K118424


INSTALLATION


Symbol Meaning
K108823

Plug Weld
K108832

Braze
K108834

Body Sealer

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

Temporarily install the new parts and measure each part of the new parts in accordance with the body dimension diagram. (See the body dimensions)


c.

Before temporarily installing the new parts, apply body sealer to the roof panel reinforcement.

HINT:

Apply enough body sealer to the panels.


K118425C01
3.552,1.375 3.25,0.667 3.25,0.667 3.083,0.667 false 4.26,1.375 4.417,0.667 4.417,0.667 4.583,0.667 false 2.917,0.583 3.229,0.74 0.313,0.156 10 false *1 4.615,0.583 4.927,0.74 0.313,0.156 10 false *1
*1 ROOF PANEL REINFORCEMENT - -


K118426C01
1.667,2 1.833,2 1.833,2 2.125,2.385 false 1.5,1.917 1.813,2.073 0.313,0.156 10 false *1
*1 ROOF PANEL - -


K118427


d.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


e.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.