Home › Vehicle Exterior › BODY PANEL › BACK DOOR OPENING UPPER TROUGH(for 2 Door Short Rug Roof Van)
BM25T0E _01 Vehicle Exterior _030570 BODY WELD POINT _0139895 BACK DOOR OPENING UPPER TROUGH(for 2 Door Short Rug Roof Van) F

BODY WELD POINT  BACK DOOR OPENING UPPER TROUGH(for 2 Door Short Rug Roof Van)  CUT AND JOIN REPLACEMENT SECTIONS  


K118073

With the quarter panel assembly removed.


REMOVAL


Symbol Meaning
K108818

Remove Weld Points
K108820

Remove Weld Points
K108826

Cut with Disc Sander etc.

K118499


INSTALLATION


Symbol Meaning
K108818

Remove Weld Points
K108821

Spot Weld
K108823

Plug Weld
K108825

Plug Weld
K108830

Fillet Weld

a.

Inspect the fitting of the related parts around the new parts before welding. This affects the appearance of the finish.


b.

If the entire supply part is not needed, remove the part of the supply part that is needed.

K118500C01
3.75,1.635 3.917,0.917 3.917,0.917 4.083,0.917 false 4.167,0.844 4.479,1 0.313,0.156 10 false *1
*1 ROOF SIDE PANEL SUB-ASSEMBLY INNER - -


K118501C01
2.906,1.615 3.219,1.771 0.313,0.156 10 false *a
*a 15 mm (0.59 in.) - -



c.

After welding, apply body sealer to the corresponding parts. (See the painting/coating)


d.

After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.