With the quarter panel cut and join replacement sections removed.
REMOVAL
| Symbol Meaning | |
|---|---|
|
Remove Weld Points |
|
Remove Weld Points |
|
Remove Weld Points |
| *A | LH | *B | for Type A |
| *A | LH | *B | for Type B |
| *A | LH | - | - |
| *A | RH | *B | for Type A |
| *A | RH | *B | for Type B |
| *A | RH | *B | for Type C |
| *A | RH | *B | for Type D |
| *A | RH | - | - |
INSTALLATION
| Symbol Meaning | |
|---|---|
|
Spot Weld |
|
Plug Weld |
|
Plug Weld |
|
Plug Weld |
|
Body Sealer |
|
Assembly Mark |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | LH | *B | for Type A |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
Apply body sealer in an even, continuous bead.
| *A | LH | *B | for Type A |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | JACK CARRIER BRACKET NO.1 |
| *3 | JACK CARRIER BRACKET NO.2 | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | LH | *B | for Type B |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | LH | *B | for Type B |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | SEAT BELT ANCHORAGE PLATE |
| *3 | QUARTER WHEEL HOUSE BRACE SUB-ASSEMBLY | *4 | JACK CARRIER BRACKET NO.1 |
| *5 | JACK CARRIER BRACKET NO.2 | - | - |
| *A | LH | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | RH | *B | for Type A |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | RH | *B | for Type A |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | BELT ANCHOR TO ROOF SIDE REINFORCE INNER REAR |
| *3 | FUEL TANK FILLER PIPE PROTECTOR BRACKET NO.2 | - | - |
| *A | RH | *B | for Type A |
| *1 | WELD BOLTS | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | RH | *B | for Type B |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | RH | *B | for Type B |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | BELT ANCHOR TO ROOF SIDE REINFORCE INNER REAR |
| *3 | REAR WASHER TANK BRACKET LOWER | *4 | FUEL TANK FILLER PIPE PROTECTOR BRACKET NO.2 |
| *A | RH | *B | for Type B |
| *1 | WELD BOLTS | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | RH | *B | for Type C |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | RH | *B | for Type C |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | BELT ANCHOR TO ROOF SIDE REINFORCE INNER REAR |
| *3 | QUARTER WHEEL HOUSE BRACE SUB-ASSEMBLY | *4 | SEAT BELT ANCHORAGE PLATE |
| *5 | FUEL TANK FILLER PIPE PROTECTOR BRACKET NO.2 | - | - |
| *A | RH | *B | for Type C |
| *1 | WELD BOLTS | - | - |
Before installing a new part, apply body sealer.
Apply body sealer in an even, continuous bead.
| *A | RH | *B | for Type D |
For positioning of the new parts, align the installation standard holes of the outer panel and the inner panel.
| *A | RH | *B | for Type D |
| *1 | QUARTER WHEEL HOUSE PANEL OUTER | *2 | BELT ANCHOR TO ROOF SIDE REINFORCE INNER REAR |
| *3 | REAR WASHER TANK BRACKET LOWER | *4 | QUARTER WHEEL HOUSE BRACE SUB-ASSEMBLY |
| *5 | SEAT BELT ANCHORAGE PLATE | *6 | FUEL TANK FILLER PIPE PROTECTOR BRACKET NO.2 |
| *A | RH | *B | for Type D |
| *1 | WELD BOLTS | - | - |
| *A | RH | - | - |
After welding, apply undercoating to the corresponding parts. (See the painting/coating)
After applying the top coat, apply anti-rust agent to the internal panel portion of the closed section structural weld points.