PLASTIC PROPERTIES CHART
When repairing, some parts may be deformed by the heat. Therefore, confirm the properties of the plastic parts, and remove parts beforehand as necessary.
| Code | Material Name | Heat Resistant Temperature Limit* °C (°F) | Resistance to Alcohol or Gasoline | Notes |
|---|---|---|---|---|
| AAS | Acrylonitrile Acrylic Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ABS | Acrylonitrile Butadiene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| AES | Acrylonitrile Ethylene Styrene | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| ASA | Acrylonitrile Styrene Acrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| CAB | Cellulose Acetate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| EPDM | Ethylene Propylene | 100 (212) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| EVA | Ethylene Acetate | 70 (158) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| E/VAC | Ethylene/Vinyl Acetate Copolymer Resin | 70 (158) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid gasoline and organic or aromatic solvents. |
| FRP | Fiber Reinforced Plastics | 180 (356) | Alcohol and gasoline are harmless. | Avoid alkali. |
| PA | Polyamide (Nylon) | 80 (176) | Alcohol and gasoline are harmless. | Avoid battery acid. |
| PBT | Polybutylene Terephthalate | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PC | Polycarbonate | 120 (248) | Alcohol is harmless. | Avoid gasoline, brake fluid, wax, wax removers and organic solvents. Avoid alkali. |
| PE | Polyethylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PEI | Polyetherimide | 160 (320) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PET | Polyethylene Terephthalate | 75 (167) | Alcohol and gasoline are harmless. | Avoid dipping in water. |
| PGM | Polypropylene Glass Fiber Pulp | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PMMA | Polymethyl Methacrylate | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| POM | Polyoxymethylene (Polyacetal) | 100 (212) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PP | Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPC | Polyphthlate Carbonate | 149 (300) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPE | Polyphenylene Ether | 80 (176) | Alcohol is harmless if applied only for short time in small amounts (e.g., quick wiping to remove grease). | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PPF | Composite Reinforced Polypropylene | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| PPO | Modified Polyphenylene Oxide | 100 (212) | Alcohol is harmless. | Gasoline is harmless if applied only for quick wiping to remove grease. |
| PS | Polystyrene | 60 (140) | Alcohol and gasoline are harmless if applied only for short time in small amounts. | Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PUR | Polyurethane | 80 (176) | Alcohol is harmless if applied only for very short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| PVC | Polyvinylchloride (Vinyl) | 80 (176) | Alcohol and gasoline are harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| SAN | Styrene Acrylonitrile | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TPE | Thermoplastic Elastomer | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPO | Thermoplastic Olefine | 80 (176) | Alcohol is harmless. Gasoline is harmless if applied only for short time in small amounts. | Most solvents are harmless but avoid dipping in gasoline, solvents, etc. |
| TPU | Thermoplastic Polyurethane | 80 (176) | Alcohol is harmless if applied only for short time in small amounts. (e.g., quick wiping to remove grease) |
Avoid dipping or immersing in alcohol, gasoline, solvents, etc. |
| TSOP | TOYOTA Super Olefine Polymer | 80 (176) | Alcohol and gasoline are harmless. | Most solvents are harmless. |
| UP | Unsaturated Polyester | 110 (233) | Alcohol and gasoline are harmless. | Avoid alkali. |
*The heat resistant temperature means a temperature that may cause heat deformation during a procedure.
THE PLASTIC BODY PARTS MATERIAL LIST (for Double Cab)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS, PC/AES) | *6 | Roof Drip Side Finish Moulding (ABS/PVC) |
| *7 | Headlight (PC/PP) | *8 | Front Bumper Hole Cover (TSOP) |
| *9 | Front Fog Light (PC/PEI) | *10 | Hood Bulge (UP,PPE/PA) |
| *11 | Side Turn Signal Light (SAN/ASA, PC) | *12 | Side Emblem (ABS) |
| *13 | Outer Rear View Mirror (ASA, ABS/ASA) | *14 | Cool Air Intake Duct (PE) |
| *15 | Air Precleaner (PP) | *16 | Front Wheel Opening Extension (TSOP) |
| *17 | Front Fender Mudguard (PP) | *18 | Side Door Step Plate Cover (PP) |
| *19 | Quarter Panel Mudguard (TPE) | *20 | Rear Combination Light (PMMA/SAN/PP) |
| *21 | License Plate Light (PC) | *22 | Quarter Ventilation Louver (AES) |
| *23 | Rear Emblem (ABS) | *24 | Rear Emblem (AES) |
| *25 | Quarter Panel Mudguard (PP) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
THE PLASTIC BODY PARTS MATERIAL LIST (for Regular Cab)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS, PC/AES) | *6 | Roof Drip Side Finish Moulding (ABS/PVC) |
| *7 | Headlight (PC/PP) | *8 | Front Bumper Hole Cover (TSOP) |
| *9 | Front Fog Light (PC/PEI) | *10 | Hood Bulge (UP, PPE/PA) |
| *11 | Side Turn Signal Light (SAN/ASA, PC) | *12 | Side Emblem (ABS) |
| *13 | Outer Rear View Mirror (ASA, ABS/ASA) | *14 | Cool Air Intake Duct (PE) |
| *15 | Air Precleaner (PP) | *16 | Front Wheel Opening Extension (TSOP) |
| *17 | Front Fender Mudguard (PP) | *18 | Side Door Step Plate Cover (PP, EVA) |
| *19 | Rear Wheel Opening Extension (TSOP) | *20 | Quarter Panel Mudguard (TPE) |
| *21 | Rear Combination Light (PMMA/SAN/PP) | *22 | License Plate Light (PC) |
| *23 | Quarter Ventilation Louver (AES) | *24 | Rear Emblem (ABS) |
| *25 | Rear Emblem (AES) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
THE PLASTIC BODY PARTS MATERIAL LIST (for 2 Door Short Steel Roof Van)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS) | *6 | Roof Drip Side Finish Moulding (ABS/PVC) |
| *7 | Headlight (PC/PP) | *8 | Front Bumper Hole Cover (TSOP) |
| *9 | Front Fog Light (PC/PEI) | *10 | Side Turn Signal Light (SAN/ASA) |
| *11 | Side Emblem (ABS) | *12 | Outer Rear View Mirror (ASA, ABS/ASA) |
| *13 | Cool Air Intake Duct (PE) | *14 | Air Precleaner (PP) |
| *15 | Front Wheel Opening Extension (TSOP) | *16 | Front Fender Mudguard (PP) |
| *17 | Side Door Step Plate Cover (PP,EVA) | *18 | Rear Wheel Opening Extension (FRP) |
| *19 | Quarter Panel Mudguard (EPDM, TPE) | *20 | Rear Bumper Corner Extension (PP) |
| *21 | Rear Combination Light (PMMA/SAN/PP/PE, AAS) | *22 | Rear Combination Light (PMMA/PC/PP) |
| *23 | License Plate Light (PC/ABS, PC) | *24 | Quarter Ventilation Louver (AAS) |
| *25 | Stop Center Light (PMMA/ABS) | *26 | Rear Emblem (ABS) |
| *27 | Rear Emblem (AES) | - | - |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
THE PLASTIC BODY PARTS MATERIAL LIST (for 2 Door Short Rug Roof Van)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS) | *6 | Headlight (PC/PP) |
| *7 | Front Bumper Hole Cover (TSOP) | *8 | Front Fog Light (PC/PEI) |
| *9 | Side Emblem (ABS) | *10 | Outer Rear View Mirror (ASA, ABS/ASA) |
| *11 | Cool Air Intake Duct (PE) | *12 | Air Precleaner (PP) |
| *13 | Front Wheel Opening Extension (TSOP) | *14 | Front Fender Mudguard (PP) |
| *15 | Side Door Step Plate Cover (PP,EVA) | *16 | Rear Wheel Opening Extension (FRP) |
| *17 | Quarter Panel Mudguard (EPDM, TPE) | *18 | Rear Bumper Corner Extension (PP) |
| *19 | Rear Combination Light (PMMA/SAN/PP/PE,AAS) | *20 | Rear Combination Light (PP/PC/PMMA) |
| *21 | License Plate Light (PC/ABS, PC) | *22 | Rear Emblem (ABS) |
| *23 | Windshield Rest Cradle (EPDM) | *24 | Windshield Support Hinge Cover (AAS) |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
THE PLASTIC BODY PARTS MATERIAL LIST (for 2 Door Long Steel Roof Van)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS, PC/AES) | *6 | Roof Drip Side Finish Moulding (ABS/PVC) |
| *7 | Headlight (PC/PP) | *8 | Front Bumper Hole Cover (TSOP) |
| *9 | Front Fog Light (PC/PEI) | *10 | Hood Bulge (UP,PPE/PA) |
| *11 | Side Turn Signal Light (SAN/ASA, PC) | *12 | Side Emblem (ABS) |
| *13 | Outer Rear View Mirror (ASA, ABS/ASA) | *14 | Cool Air Intake Duct (PE) |
| *15 | Air Precleaner (PP) | *16 | Front Fender Mudguard (PP) |
| *17 | Side Door Step Plate Cover (PP,EVA) | *18 | Quarter Panel Mudguard (EVAC, TPE) |
| *19 | Rear Bumper Corner Extension (PP) | *20 | Rear Combination Light (PMMA/SAN/PP/PE, AAS/PMMA,AAS) |
| *21 | Rear Combination Light (PMMA/PC/PP) | *22 | License Plate Light (PC/ABS) |
| *23 | Quarter Ventilation Louver (AAS) | *24 | Stop Center Light (PMMA/ABS) |
| *25 | Rear Emblem (ABS) | *26 | Rear Emblem (AES) |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.
THE PLASTIC BODY PARTS MATERIAL LIST (for 4 Door Steel Roof Van)
| *1 | Front Bumper (TSOP) | *2 | Front Bumper Winch Cover (TSOP) |
| *3 | Front Bumper Garnish (PC/ABS) | *4 | Radiator Grille (AES, ABS) |
| *5 | Radiator Grille Emblem (ABS, PC/AES) | *6 | Roof Drip Side Finish Moulding (ABS/PVC) |
| *7 | Headlight (PC/PP) | *8 | Front Bumper Hole Cover (TSOP) |
| *9 | Front Fog Light (PC/PEI) | *10 | Hood Bulge (UP,PPE/PA) |
| *11 | Side Turn Signal Light (SAN/ASA, PC) | *12 | Side Emblem (ABS) |
| *13 | Outer Rear View Mirror (ASA, ABS/ASA) | *14 | Cool Air Intake Duct (PE) |
| *15 | Air Precleaner (PP) | *16 | Front Wheel Opening Extension (TSOP) |
| *17 | Front Fender Mudguard (PP) | *18 | Side Door Step Plate Cover (PP) |
| *19 | Rear Wheel Opening Extension (FRP) | *20 | Quarter Panel Mudguard (PP) |
| *21 | Rear Bumper Corner Extension (PP) | *22 | Rear Combination Light (PMMA/PP, SAN/PMMA/PP) |
| *23 | Rear Combination Light (PMMA/PC/PP) | *24 | License Plate Light (PC/ABS, PC) |
| *25 | Quarter Ventilation Louver (AAS) | *26 | Stop Center Light (PMMA/ABS) |
| *27 | Rear Emblem (ABS) | *28 | Rear Emblem (AES) |
/ Made up of 2 or more kinds of materials.
, Resin material differs with model.