Home › Engine / Hybrid System › 1VD-FTV (ENGINE CONTROL) › ECD SYSTEM
NM25T0E _51 Engine / Hybrid System _029314 1VD-FTV ENGINE CONTROL _0133904 ECD SYSTEM CO CONTROL F

1VD-FTV ENGINE CONTROL  ECD SYSTEM  CONTROL  DURING STARTING CONTROL  


FUNCTION


a.

The starting injection volume is determined by adjusting the basic injection volume in accordance with the starter ON signals (ON time), engine coolant temperature sensor signals and engine speed signal. When the engine is cold, the engine coolant temperature will be lower and the injection volume will be greater.

Injection Volume Control
W123179E01
0.25,0.406 0.677,0.802 0.427,0.396 10 false ECM 0.552,0.875 2.083,1.24 1.531,0.365 10 false Basic Injection Volume 0.969,2.302 1.677,2.615 0.708,0.313 10 false Correction 5.26,1.688 6.188,2.083 0.927,0.396 10 false Starter Signal 4.583,2.229 6.875,2.438 2.292,0.208 10 false Engine Coolant Temperature Sensor 5.021,2.74 6.521,2.948 1.5,0.208 10 false Crank Position Sensor


b.

To determine the starting injection timing, the target injection timing is corrected in accordance with the starter signals, engine coolant temperature, and engine speed. When the engine coolant temperature is low, if the engine speed is high, the injection timing is advanced.

Injection Timing Control
W123180E01
0.26,0.385 0.656,0.76 0.396,0.375 10 false ECM 0.573,1.302 2.104,1.875 1.531,0.573 10 false Target Injection Timing Correction 5.271,0.844 6.26,1.198 0.99,0.354 10 false Starter Signal 4.573,1.375 6.844,1.583 2.271,0.208 10 false Engine Coolant Temperature Sensor 5,1.885 6.5,2.104 1.5,0.219 10 false Crank Position Sensor