1VD-FTV ENGINE CONTROL ECD SYSTEM DETAILS CAMSHAFT POSITION SENSOR
CONSTRUCTION
a.
The Hall element type cam position sensor is used to detect the camshaft position. The sensor generates one signal in every 2 revolutions of the crankshaft by using the timing trigger of the timing sprocket.
1.51,1.188 1.219,0.375true1.688,1.125 1.99,0.25true1.229,1.375 0.99,2.26true0.313,0.25 1.281,0.6040.969,0.35410falseTiming Trigger2.031,0.146 3.25,0.4791.219,0.33310falseTiming Sprocket0.385,2.281 2.083,2.5731.698,0.29210falseCam Position Sensor4.479,0.594 6.094,0.9271.615,0.33310falseG Signal Plate (720° CA)