CONSTRUCTION
Each cylinder has 2 intake valves and 2 exhaust valves. Intake and exhaust efficiency is increased by means of the larger total port areas.
The timing chain sub-assembly drives the intake camshaft, and a gear that is attached to the intake camshaft drives the exhaust camshaft.
This engine uses No. 1 valve rocker arm sub-assemblies with double roller bearings. This reduces the friction that occurs between the cams and the areas (No. 1 valve rocker arm sub-assemblies) that push the valves down, thus improving fuel economy.
The valve lash adjuster assemblies, which maintain a constant zero valve clearance through the use of oil pressure and spring force, are used.
| *1 | Timing Chain Sub-assembly | *2 | Exhaust Camshaft RH (No. 2 Camshaft) |
| *3 | Intake Camshaft RH (Camshaft) | *4 | Intake Camshaft LH (No. 3 Camshaft) |
| *5 | Exhaust Camshaft LH (No. 4 Camshaft) | *6 | No. 1 Valve Rocker Arm Sub-assembly |
| *7 | Valve Lash Adjuster Assembly | *8 | Valve |