CONSTRUCTION
The valve lash adjuster assembly, which is located at the fulcrum of the No. 1 valve rocker arm sub-assembly, consists primarily of a plunger, plunger spring, check ball, and check ball spring.
The engine oil that is supplied by the cylinder head and the built-in spring actuates the valve lash adjuster assembly. The oil pressure and the spring force that act on the plunger push the No. 1 valve rocker arm sub-assembly against the cam in order to adjust the valve clearance that is created during the opening and closing of the valve. As a result, engine noise is reduced.
| *1 | Check Ball | *2 | Check Ball Spring |
| *3 | Plunger Spring | *4 | Plunger |
| *5 | No. 1 Valve Rocker Arm Sub-assembly | *6 | Valve Lash Adjuster Assembly |
| *7 | Cam | - | - |
| *a | Oil Passage | - | - |
Valve clearance adjustment is not necessary because a hydraulic lash adjuster is used in this model.