SYSTEM CONTROL
In this system, the high-pressurized fuel that is supplied by the supply pump is stored in the common-rail, and the ECM sends signals to the injectors via the injector driver in order to control the injection timing and injection volume.
Fuel pressure is controlled in accordance with the fuel pumping volume that is controlled by the Suction Control Valve (SCV) in the supply pump assembly. The SCV is controlled by the ECM via the injector driver.
| *1 | Supply Pump Assembly | *2 | Fuel Temperature Sensor |
| *3 | SCV | *4 | ECM |
| *5 | No. 1 Injector Driver | *6 | No. 2 Injector Driver |
| *7 | Common-rail Assembly RH | *8 | Fuel Pressure Sensor |
| *9 | Fuel Cooler (Water-cooled Type) | *10 | Injector Assembly |
| *11 | Fuel Cooler (Air-cooled Type) | *12 | Fuel Filter |
| *13 | Fuel Tank Assembly | *14 | Common-rail Assembly LH |
| *15 | Pressure Limiter | - | - |
| *a | High Pressure Fuel | *b | Return Fuel |
| *c | Suctioned Fuel | - | - |