CONSTRUCTION
The supply pump assembly consists of an inner cam (eccentric cam), outer cam (polygon ring), 3 plungers, Suction Control Valve (SCV), and feed pump. Each plunger is placed outside of the outer cam.
Feed pump pumps fuel to 3 plungers.
SCV controls volume of fuel drawn into plungers.
Inner cam drives outer cam.
Outer cam drives 3 plungers.
Plunger pressurizes fuel.
| *1 | Supply Pump Assembly | *2 | Feed Pump |
| *3 | SCV | *4 | Plunger |
| *5 | Inner Cam | *6 | Outer Cam |
OPERATION
Due to the rotation of the inner cam (eccentric cam), the outer cam pushes plunger "A" upward as illustrated below. The force of the spring pulls plungers "B" and "C". As a result, plungers "B" and "C" draw fuel in, and plunger "A" pumps fuel at the same time.
| *1 | SCV | *2 | Plunger "A" |
| *3 | Plunger "B" | *4 | Plunger "C" |
| *5 | Inner Cam | *6 | Outer Cam |
| *a | Suction | *b | To Injector |
| *c | Pumping Finish | *d | Pumping Start |
| *e | Suction | - | - |