CONSTRUCTION
An injector assembly consists of a nozzle needle, piston, and solenoid valve.
An injector compensation value and Quick Response (QR) code containing encoded characteristics of the injector assembly are printed on each injector.
The injector compensation value and QR code contain various pieces of information regarding the injector assembly, such as model code, injection volume correction, and injection timing correction values.
| *1 | Injector Assembly | *2 | Solenoid Valve |
| *3 | Piston | *4 | Nozzle Needle |
| *a | QR Code | *b | Injector Compensation Value |
If the ECM is replaced, use the intelligent tester II and input the injector compensation values of all 8 injectors. If one of the injectors is replaced, input the injector compensation value of the replaced injector. Then, the proper compensation will be made so that the injection volume precision prior to the replacement will remain unchanged. For details, refer to the Repair Manual.
The QR code, which requires a special scan tool, is not used at TOYOTA dealers.
What is QR (Quick Response) Code?
QR code, a matrix symbology consisting of an array of nominally square cells, allows omni-directional, high-speed reading of large amounts of data.
QR code encodes many types of data such as numeric, alphanumeric, kanji, kana and binary code. A maximum of 7,089 characters (numeric) can be encoded.
QR code (2D code) contains information in the vertical and horizontal directions, whereas a bar code contains data in one direction only. QR code (2D code) holds a considerably greater volume of information than a bar code.
OPERATION
When electrical current is applied to the solenoid coil, it pulls the solenoid valve up.
The orifice of the control chamber opens, allowing the fuel to flow out.
The fuel pressure in the control chamber drops.
Simultaneously, fuel flows from the orifice to the bottom of the piston and raises the piston up (to enhance response).
As a result, the piston raises the nozzle needle to inject fuel.