Home › Engine / Hybrid System › 1VD-FTV (INTAKE / EXHAUST) › EXHAUST SYSTEM › 2014.08–2016.08
NM25T0E _51 Engine / Hybrid System _029309 1VD-FTV INTAKE / EXHAUST _0133910 EXHAUST SYSTEM GE GENERAL F

1VD-FTV INTAKE / EXHAUST  EXHAUST SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

Because a single turbocharger sub-assembly is used on a V type engine, a crossover pipe is used to merge the exhaust gas from the right bank to the left bank.


b.

A stainless steel exhaust pipe is used for weight reduction and improved rust resistance.


c.

An EGR control is used. This control is designed to reduce and control NOx formation through a slight reduction of peak temperature in the engine combustion chamber, which is accomplished by introducing a small amount of inert gas into the intake manifold.

For details of EGR control, see the EMISSION CONTROL (1VD-FTV) section.Engine / Hybrid System>1VD-FTV (EMISSION CONTROL)>EMISSION CONTROL SYSTEM>EGR CONTROL


d.

An oxidation catalytic converter is used in the front exhaust pipe assembly.