CONSTRUCTION
A scavenging pump assembly is used to suppress the accumulation of oil in the turbocharger while driving on a slope.
The scavenging pump assembly, which is located at the back end of the cylinder block, is driven by the crankshaft via gears.
After the turbocharger sub-assembly discharges the oil, the scavenging pump assembly returns the oil from the oil catch tank through forced suction and discharges it to the oil pan.
| *1 | Turbocharger Sub-assembly | *2 | Oil Catch Tank |
| *3 | Scavenging Pump Assembly | *4 | Driven Gear |
| *5 | Rotor | - | - |
| *a | Scavenging Pump Assembly Cross Section | - | - |
| *1 | Scavenging Pump Assembly | *2 | Rotor |
| *3 | Oil Pan | *4 | Oil Catch Tank |
| *5 | Turbocharger Sub-assembly | - | - |
|
Engine Oil |
|
Gas |
| Component | Function | |
|---|---|---|
| Oil Catch Tank | Integrated in the oil pan, the oil catch tank separates the oil discharged by the turbocharger into gas and liquid. | |
| Scavenging Pump Assembly | Rotor | Returns the oil from the oil catch tank by suction, and discharges it to the oil pan. |