FUNCTION OF MAIN COMPONENTS
| Component | Function |
|---|---|
| Heater Blower Switch Assembly | Allows operation and adjustment of the air conditioning system*1 or heater system*2 via switches and levers. |
| Cooler Stabilizer Amplifier Assembly*1 | Transmits and receives signals to and from the switches and sensors. |
| Cooler Compressor Assembly*1 | A compact and lightweight 10-cylinder swash plate type cooler compressor is used. |
| Cooler Condenser Assembly*1 | A multi-flow sub-cool condenser is used to improve heat exchange efficiency. |
| Heater Radiator Unit Sub-assembly*1, *2 | A multi-flow type heater radiator is used for compactness and high performance. |
| Blower with Motor Sub-assembly | The blower with motor sub-assembly is controlled by the blower switch on the heater blower switch assembly. |
| No. 1 Cooler Evaporator Sub-assembly*1 | A multi-flow type evaporator is used for compactness. |
| No. 1 Cooler Thermistor*1 | Detects the temperature of the cool air past the No. 1 cooler evaporator sub-assembly and transmits the data to the cooler stabilizer amplifier assembly. |
| Air Filter | Prevents dust, etc., from entering the cabin. |
| ECM*3 | Transmits the air conditioning off request signal to the cooler stabilizer amplifier assembly. |
*1: Models with manual air conditioning system
*2: Models with manual heater system
*3: Models with 1GR-FE engine or 1VD-FTV engine