OUTLINE
A manual heater system, manual air conditioning system or ventilation system (without air conditioning system) is used.
A rear heater is used.
SPECIFICATION
Ventilation and Heater Radiator
| Model | Specifications | ||
|---|---|---|---|
| Front | Rear*1 | ||
| Heater Radiator Unit Sub-assembly | Type | Multi-flow | Multi-flow |
| Size W x H x L | 143.1 mm x 200.4 mm x 36 mm (5.6 in. x 7.9 in. x 1.4 in.) | 120.4 mm x 92.7 mm x 36 mm (4.7 in. x 3.6 in. x 1.4 in.) | |
| Fin Pitch | 2.0 mm (0.08 in.) | 2.25 mm (0.09 in.)*2 2.8 mm (0.11 in.)*3 |
|
| Blower with Motor Sub-assembly | Motor Type | K62-11.5T*4 70F-25T*5 |
Ferrite Magnet Type |
| Fan Type | Shroud Fan | Shroud Fan | |
| Fan Size Dia. x H | 140 mm x 70 mm (5.5 in. x 2.8 in.) | 115.3 mm x 65 mm (4.5 in. x 2.6 in.) | |
*1: Models with rear heater
*2: For quarter panel
*3: For console box
*4: When the vehicle voltage is 12 V.
*5: When the vehicle voltage is 24 V.
Air Conditioning
| Model | Specifications | |
|---|---|---|
| Cooler Condenser Assembly | Type | Multi-flow |
| Size W x H x L | 540 mm x 504.6 mm x 16 mm (21.2 in. x 19.9 in. x 0.6 in.) | |
| Fin Pitch | 3.55 mm (0.14 in.) | |
| Cooler Compressor Assembly | 10S15C*1 10S17C*2 |
|
| No. 1 Cooler Evaporator Sub-assembly | Type | RS Evaporator |
| Size W x H x L | 212.7 mm x 185 mm x 50 mm (8.4 in. x 7.3 in. x 2.0 in.)*3 212.7 mm x 165 mm x 50 mm (8.4 in. x 6.5 in. x 2.0 in.)*4 |
|
| Fin Pitch | 3.4 mm (0.13 in.) | |
| Refrigerant | Type | R134a |
| Charge Volume | 500 g +/-30 g | |
*1: Models with 10S15C type
*2: Models with 10S17C type
*3: LHD models
*4: RHD models