FUNCTION
The VVT-i system is designed to control the intake camshaft within a range of 50° (of crankshaft angle) to provide valve timing that is optimally suited to the engine operating conditions. This improves torque in all the speed ranges as well as increasing fuel economy and reducing exhaust emissions.
| *1 | Cam Position Sensor (Bank 1) | *2 | Camshaft Timing Oil Control Valve Assembly (Bank 1) |
| *3 | Engine Coolant Temperature Sensor | *4 | Camshaft Timing Oil Control Valve Assembly (Bank 2) |
| *5 | Cam Position Sensor (Bank 2) | *6 | Crankshaft Position Sensor |
| *7 | ECM | *8 | Accelerator Pedal Sensor Assembly |
| *9 | Throttle Position Sensor | - | - |
The VVT-i system delivers excellent benefits in the different operating conditions as shown in the table below:
| Operation State | Objective | Effect | |
|---|---|---|---|
| During Idling |
1.563,1.917 1.885,2.104 0.323,0.188 10 false BDC 2.51,1 2.833,1.188 0.323,0.188 10 false IN 0.76,1 1,1.25 0.24,0.25 10 false EX 1.583,0.094 1.906,0.281 0.323,0.188 10 false TDC 2.167,0.167 3.167,0.385 1,0.219 10 false Latest Timing
|
Eliminating overlap reduces blow back to the intake side. |
·
Stabilized idling speed
·
Better fuel economy |
| At Light Load |
1.583,0.083 1.927,0.271 0.344,0.188 10 false TDC 1.563,1.917 1.938,2.104 0.375,0.188 10 false BDC 0.771,1 1.083,1.198 0.313,0.198 10 false EX 2.521,1 2.833,1.198 0.313,0.198 10 false IN 2.146,0.25 3.167,0.438 1.021,0.188 10 false To Retard Side
|
Decreasing overlap to reduce blow back to the intake side. | Ensured engine stability |
| At Medium Load |
1.583,0.052 2.042,0.25 0.458,0.198 10 false TDC 1.563,1.917 2.021,2.115 0.458,0.198 10 false BDC 2.5,1 2.958,1.198 0.458,0.198 10 false IN 0.75,1 1.208,1.198 0.458,0.198 10 false EX 0.521,0.167 1.25,0.5 0.729,0.333 10 false To Advance Side
|
Increasing overlap to increase internal EGR to reduce pumping loss. |
·
Better fuel economy
·
Improved emission control |
| In Low to Medium Speed Range with Heavy Load |
1.583,0.083 2.042,0.281 0.458,0.198 10 false TDC 1.552,1.969 2.01,2.167 0.458,0.198 10 false BDC 2.5,1 2.958,1.198 0.458,0.198 10 false IN 0.75,1 1.208,1.198 0.458,0.198 10 false EX 2.25,1.646 2.979,2 0.729,0.354 10 false To Advance Side
|
Advancing the intake valve close timing for volumetric efficiency improvement. | Improved torque in low to medium speed range |
| In High Speed Range with Heavy Load |
1.583,0.083 2.042,0.281 0.458,0.198 10 false TDC 1.552,1.969 1.917,2.167 0.365,0.198 10 false BDC 2.5,1 2.958,1.198 0.458,0.198 10 false IN 0.75,1 1.208,1.198 0.458,0.198 10 false EX 0.5,1.625 1.115,2 0.615,0.375 10 false To Retard Side
|
Retarding the intake valve close timing for volumetric efficiency improvement. | Improved output |
| At Low Temperatures |
1.563,1.917 1.885,2.104 0.323,0.188 10 false BDC 2.51,1 2.833,1.188 0.323,0.188 10 false IN 0.76,1 1,1.25 0.24,0.25 10 false EX 1.583,0.094 1.906,0.281 0.323,0.188 10 false TDC 2.167,0.167 3.167,0.385 1,0.219 10 false Latest Timing
|
Eliminating overlap to prevent blow back to the intake side leads to the lean burning condition, and stabilizes the idling speed at fast idle. |
·
Stabilized fast idle speed
·
Better fuel economy |
|
·
Starting Engine
·
Stopping Engine |
1.563,1.917 1.885,2.104 0.323,0.188 10 false BDC 2.51,1 2.833,1.188 0.323,0.188 10 false IN 0.76,1 1,1.25 0.24,0.25 10 false EX 1.583,0.094 1.906,0.281 0.323,0.188 10 false TDC 2.167,0.167 3.167,0.385 1,0.219 10 false Latest Timing
|
Eliminating overlap to minimize blow back to the intake side. | Improved startability |