Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › ENGINE UNIT
NM25T0E _51 Engine / Hybrid System _029292 1GR-FE ENGINE MECHANICAL _0137842 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  VVT-i CONTROLLER  


CONSTRUCTION


a.

This controller consists of the housing driven from the timing chain and the vane coupled with the intake camshaft.


b.

The oil pressure sent from the advance or retard side path at the intake camshaft causes rotation in the VVT-i controller vane circumferential direction to vary the intake valve timing continuously. When the engine is stopped, the intake camshaft will be in the most retarded state to ensure startability.


c.

When hydraulic pressure is not applied to the VVT-i controller immediately after the engine has started, the lock pin locks the movement of the VVT-i controller to prevent a knocking noise. Thereafter, when hydraulic pressure is applied to the VVT-i controller, the lock pin is released.

W104358C01
1.781,3.177 1.833,3.51 1.833,3.51 1.927,3.51 true 2.771,2.865 2.771,3.5 2.771,3.5 2.979,3.5 true 3.813,2.5 3.813,3 3.813,3 4.021,3 true 3.854,1.854 4.042,0.833 4.042,0.833 4.313,0.833 true 4.885,2.365 5.083,2.948 5.083,2.948 5.323,2.948 true 5.792,1.792 5.99,2.292 5.99,2.292 6.24,2.292 true 1.844,1.198 2.083,1.438 0.24,0.24 10 false *a 2.833,1.208 3.073,1.448 0.24,0.24 10 false *b 1.979,3.396 2.219,3.635 0.24,0.24 10 false *1 3.01,3.375 3.25,3.615 0.24,0.24 10 false *2 4.052,2.885 4.292,3.125 0.24,0.24 10 false *3 4.354,0.729 4.594,0.969 0.24,0.24 10 false *4 5.365,2.833 5.604,3.073 0.24,0.24 10 false *5 6.281,2.177 6.521,2.417 0.24,0.24 10 false *6
*1 Timing Rotor *2 Outer Housing
*3 Vane (Coupled to Intake Camshaft) *4 Lock Pin
*5 Timing Chain Sprocket *6 Intake Camshaft
*a Engine Operating *b Engine Stopped
V100135

Oil Pressure - -