Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › ENGINE UNIT
NM25T0E _51 Engine / Hybrid System _029292 1GR-FE ENGINE MECHANICAL _0137842 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CRANKSHAFT BEARING AND CRANKSHAFT BEARING CAP  


CONSTRUCTION


a.

The crankshaft main bearings are made of aluminum alloy.


b.

Similar to the connecting rod bearings, the lining surface of the crankshaft bearings is micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance is improved and engine vibration is reduced.


c.

The upper crankshaft bearings have an oil groove around the inside circumference.


d.

The crankshaft bearing caps are tightened using 4 plastic region tightening bolts for each journal. In addition, each cap is tightened laterally to improve its reliability.

W100638C02
1.625,0.708 1.625,0.198 1.625,0.198 2.604,0.198 true 1.833,0.833 1.833,0.208 true 2.125,1.094 2.125,0.208 true 2.323,1.167 2.323,0.208 true 2.021,2.24 1.76,3.083 1.76,3.083 1.615,3.083 true 6.26,1.417 6.375,1.021 6.375,1.021 6.521,1.021 true 5.604,2.75 5.49,3.01 5.49,3.01 5.365,3.01 true 5.406,1.49 5.271,0.833 5.271,0.833 5.115,0.833 true 5.26,1.594 5.052,1.396 5.052,1.396 4.865,1.396 true 2.635,0.063 2.906,0.302 0.271,0.24 10 false *1 1.427,2.99 1.698,3.229 0.271,0.24 10 false *2 6.573,0.906 6.844,1.146 0.271,0.24 10 false *3 4.938,0.729 5.208,0.969 0.271,0.24 10 false *5 4.688,1.292 4.958,1.531 0.271,0.24 10 false *6 5.188,2.906 5.458,3.146 0.271,0.24 10 false *4
*1 Plastic Region Tightening Bolt *2 Crankshaft Bearing Cap
*3 Upper Crankshaft Bearing *4 Lower Crankshaft Bearing
*5 Oil Groove *6 Micro-grooved Surface