CONSTRUCTION
The camshafts are made of cast iron alloy.
In conjunction with the use of the VVT-i system, an oil passage is provided in the intake camshaft in order to supply engine oil to the VVT-i system.
A VVT-i controller has been installed on the front of the intake camshaft to vary the timing of the intake valves.
To detect the intake camshaft position, a timing rotor is provided in front of the VVT-i controller. This timing rotor, which is secured to the intake camshaft, is used by the VVT sensor to detect the actual position of the intake camshaft.
| *1 | No. 2 Camshaft (Exhaust) | *2 | No. 1 Camshaft (Intake) |
| *3 | VVT-i Controller | *4 | Timing Rotor |
| *5 | No. 3 Camshaft (Intake) | *6 | No. 4 Camshaft (Exhaust) |