Home › Engine / Hybrid System › 1GR-FE (ENGINE MECHANICAL) › ENGINE UNIT
NM25T0E _51 Engine / Hybrid System _029292 1GR-FE ENGINE MECHANICAL _0137842 ENGINE UNIT DE DETAILS F

1GR-FE ENGINE MECHANICAL  ENGINE UNIT  DETAILS  CONNECTING ROD AND CONNECTING ROD BEARING  


CONSTRUCTION


a.

Connecting rods that have been forged for high strength are used for weight reduction.


b.

Knock pins are used at the mating surfaces of the bearing caps of the connecting rod to minimize the shifting of the bearing caps during assembly.


c.

Plastic region tightening bolts are used.


d.

An aluminum bearing is used for the connecting rod bearings.


e.

The lining surface of the connecting rod bearing has been micro-grooved to achieve an optimal amount of oil clearance. As a result, cold-engine cranking performance has been improved and engine vibrations have been reduced.

W100640C01
1.813,2.958 1.896,3.354 1.896,3.354 2.99,3.354 true 2.594,2.948 2.677,3.344 true 2.573,2.583 2.635,2.135 2.635,2.135 2.76,2.135 true 4.208,2.104 4.115,1.729 4.115,1.729 4,1.729 true 5.281,1.333 5.385,0.875 5.385,0.875 5.604,0.875 true 3.031,3.26 3.281,3.5 0.25,0.24 10 *1 2.813,2.052 3.063,2.292 0.25,0.24 10 *2 5.656,0.781 5.906,1.021 0.25,0.24 10 *4 3.823,1.646 4.073,1.885 0.25,0.24 10 *3
*1 Plastic Region Tightening Bolt *2 Knock Pin
*3 Connecting Rod Bearing *4 Micro-grooved Surface