Home › Engine / Hybrid System › 1GR-FE INTAKE / EXHAUST › INTAKE SYSTEM
NM25T0E _51 Engine / Hybrid System _029295 1GR-FE INTAKE / EXHAUST _0137845 INTAKE SYSTEM DE DETAILS F

1GR-FE INTAKE / EXHAUST  INTAKE SYSTEM  DETAILS  INTAKE MANIFOLD  


CONSTRUCTION


a.

Lightweight aluminum alloy is used for the intake manifold.


b.

This intake manifold consists of two pieces, the upper and lower, which are sealed with a rubber gasket and adhesive.

W104371C01
1.677,1.958 1.448,1.24 1.448,1.24 1.24,1.24 true 5.25,1.115 5.104,0.667 5.104,0.667 4.948,0.667 true 4.875,2.01 4.625,1.573 4.625,1.573 4.438,1.573 true 4.844,2.729 4.604,2.323 4.604,2.323 4.438,2.323 true 5.146,2.906 4.958,3.323 4.958,3.323 4.813,3.323 true 1.063,1.135 1.313,1.375 0.25,0.24 10 false *1 4.76,0.563 5.01,0.802 0.25,0.24 10 false *2 4.271,1.458 4.521,1.698 0.25,0.24 10 false *3 4.25,2.219 4.5,2.458 0.25,0.24 10 false *4 4.646,3.208 4.896,3.448 0.25,0.24 10 false *5
*1 Intake Manifold *2 Upper
*3 Rubber Gasket *4 Lower
*5 Adhesive - -


HINT:
·

Do not disassemble the upper and lower portions of the two-piece intake manifold, which are sealed with a rubber gasket and adhesive. To remove the intake manifold, remove the 10 bolts that are shown in the illustration.

·

These bolts have hexagon-shaped heads.

W104372C01
2.958,1.073 2.802,0.479 2.802,0.479 2.625,0.479 true 4.344,1.51 4.583,2.115 4.583,2.115 4.802,2.115 true 2.438,0.375 2.677,0.615 0.24,0.24 10 false *1 4.833,2.01 5.052,2.25 0.219,0.24 10 false *2
*1 Intake Manifold *2 Hexagon-shaped Bolt