CONSTRUCTION
A stainless steel exhaust pipe is used for weight reduction and rust resistance.
Ceramic type TWCs are used.
A ball joint is used to join the front exhaust pipe and center exhaust pipe. As a result, a simple and reliable construction for reducing vibrations has been achieved.
| *1 | Front Exhaust Pipe Assembly | *2 | TWC |
| *3 | Ball Joint | *4 | Center Exhaust Pipe Assembly |
| *5 | Main Muffler | *6 | Tail Exhaust Pipe Assembly |
| *1 | Front Exhaust Pipe Assembly | *2 | TWC |
| *3 | Ball Joint | *4 | Center Exhaust Pipe Assembly |
| *5 | Main Muffler | *6 | Tail Exhaust Pipe Assembly |
| *1 | Front Exhaust Pipe Assembly | *2 | TWC |
| *3 | Center No. 1 Exhaust Pipe Assembly | *4 | Ball Joint |
| *5 | Center No. 2 Exhaust Pipe Assembly | *6 | Main Muffler |
| *7 | Tail Exhaust Pipe Assembly | - | - |
| *A | Single Cab Models | *B | Double Cab Models |
| *1 | Front Exhaust Pipe Assembly | *2 | TWC |
| *3 | Center No. 1 Exhaust Pipe Assembly | *4 | Ball Joint |
| *5 | Center No. 2 Exhaust Pipe Assembly | *6 | Main Muffler |
| *7 | Tail Exhaust Pipe Assembly | - | - |