CONSTRUCTION
Upper Body
The body has low vibration and noise due to the high rigidity provided by reinforcements positioned at the connections of each pillar.
Reinforcements are positioned in the side portion of the upper body at the connections of each pillar and the roof side rail. Also, reinforcements are positioned at the connections of each pillar and the rocker.
Reinforcements are provided in the floor at the connections of the dash panel and the floor, and the dash panel and each pillar.
| *1 | Front Body Pillar Upper Inner Gusset | *2 | Center Body Pillar Upper Reinforcement |
| *3 | Rear Pillar Inner Upper Reinforcement | *4 | Roof Side Inner Upper Extension |
| *5 | Back Door Opening Upper Reinforcement | *6 | Front Body Pillar Lower Reinforcement |
| *7 | Center Body Pillar Lower Reinforcement | *8 | Roof Side Quarter Panel |
| *9 | Back Door Opening Reinforcement | - | - |
| *a | The illustration shown is an example only. | - | - |
| *1 | Dash Panel | *2 | Dash to Floor Reinforcement |
| *3 | Front Floor Panel | *4 | Front Floor Panel Reinforcement |
| *5 | Floor Side Inner Reinforcement | *6 | No. 2 Floor Side Member Reinforcement |
| *7 | No. 4 Rear Floor Cross Member Reinforcement | *8 | Lower Back Panel Reinforcement |
| *9 | Floor Cross Member | - | - |
| *a | The illustration shown is an example only. | - | - |
Frame
4 types of frames are used depending on the wheel base.
Deck
A steel deck with a tailgate that can be opened is used for the single cab and double cab pick-up models.
A spare tire is positioned in the header board assembly of the deck depending on the specification.