CONSTRUCTION
An OHC that is driven by a belt and gears is used for the valve drive mechanism.
Each cylinder has an intake valve and an exhaust valve.
The valves are directly opened and closed by the camshaft.
The camshaft is driven by a timing belt.
A hydraulic type No. 1 timing belt tensioner assembly is used to maintain proper timing belt tension at all times.
| *1 | No. 1 Camshaft Timing Pulley | *2 | Idler Pulley |
| *3 | No. 1 Timing Belt Tensioner Assembly | *4 | Crankshaft Timing Gear |
| *5 | Idler Gear | *6 | Injection Pump Driven Gear |
| *7 | No. 2 Camshaft Timing Pulley | *8 | Timing Belt |
| *9 | Oil Seal | *10 | Push Rod |
| *11 | Check Ball | - | - |
| *a | No. 1 Timing Belt Tensioner Assembly Cross Section | - | - |