FUNCTION OF MAIN COMPONENTS
The main components of the Boost Altitude Compensation System (BACS) control are as follows:
| Components | Function |
|---|---|
| Emission Control ECU | Controls the fuel injection volume based on signals from each sensor. |
| Injection Pump Assembly
ยท
Boost Altitude Compensation System (BACS) |
Actuated by the emission control ECU via the vacuum regulating valve assembly and vacuum switching valve, BACS controls the fuel injection volume. |
| Throttle Position Sensor | Detects the amount of pedal effort applied to the accelerator pedal. |
| Engine Speed Sensor | Detects the engine speed. |
| Engine Coolant Temperature Sensor | Detects the engine coolant temperature. |
| Vacuum Sensor | Detects the intake air pressure. |
| No. 1 Vacuum Switching Valve (for BACS) | Controls the vacuum that acts on the BACS diaphragm of the injection pump assembly according to signals from the emission control ECU. |
| Vacuum Regulating Valve Assembly |
FUNCTION
When the intake air volume decreases while the vehicle is being driven at high altitudes, the emission control ECU, by way of the vacuum regulating valve assembly, reduces the vacuum that acts on the bottom of the vacuum chamber diaphragm. Accordingly, the push rod lifts up and the spill ring moves in the direction to reduce the injection volume, in order to reduce the maximum injection volume and restrain the discharge of black smoke.
During sudden acceleration, the emission control ECU calculates the target BACS vacuum valve in accordance with the signals from the sensors (which determine the conditions of the engine). Then, by way of the vacuum regulating valve assembly and No. 1 vacuum switching valve (for BACS), the emission control ECU controls the vacuum that acts on the bottom of the vacuum chamber diaphragm in order to control the maximum injection volume and restrain the discharge of black smoke.
| *1 | Boost Altitude Compensation System (BACS) | *2 | Push Rod |
| *3 | Spill Ring | *4 | Injection Pump Assembly |
| *5 | No. 1 Vacuum Switching Valve (for BACS) | *6 | Vacuum Damper |
| *7 | Vacuum Regulating Valve Assembly | *8 | Vacuum Pump |
| *9 | Emission Control ECU | *10 | Engine Speed Sensor |
| *11 | Throttle Position Sensor | *12 | Engine Coolant Temperature Sensor |
| *13 | Vacuum Sensor | - | - |
| *a | Atmospheric Pressure | *b | Vacuum (from Vacuum Switching Valve) |
| *c | Vacuum Chamber | *d | Injection Volume Reduction |