CONSTRUCTION
A shaft slide type with 3 shift fork shafts is used.
An aluminum die-cast No. 1 gear shift fork, No. 2 gear shift fork and No.3 gear shift fork with superior anti-friction performance are used.
A reverse mis-shift prevention mechanism and a reverse 1-way mechanism have been provided to ensure reliability.
| *1 | Shift Lever Housing | *2 | Reverse Restrict Pin Assembly |
| *3 | No. 3 Gear Shift Fork | *4 | Reverse Shift Fork |
| *5 | Reverse Shift Fork Shaft | *6 | No. 1 Gear Shift Fork Shaft |
| *7 | No. 2 Gear Shift Fork Shaft | *8 | No. 2 Gear Shift Fork |
| *9 | No. 1 Gear Shift Fork | *10 | Shift and Select Lever Shaft |
|
Engine Side | - | - |
OPERATION
Reverse 1-way Mechanism
The reverse 1-way mechanism operates the reverse shift fork only when the shift lever is moved to R.
| *1 | Roller (No. 1 Shift Interlock Roller) | *2 | No. 1 Gear Shift Fork |
| *3 | Reverse Shift Fork Shaft | *4 | Reverse Shift Fork |
| *5 | Transmission Intermediate Plate | *6 | No. 3 Gear Shift Fork |
| *7 | No. 1 Gear Shift Fork Shaft | *8 | Snap Ring |
|
Engine Side | - | - |
When moving the shift lever to 5th, the No. 3 gear shift fork moves to the right. At this time, the roller inside the transmission intermediate plate fits into the groove of the No. 1 gear shift fork shaft, securing the No. 1 gear shift fork shaft in the neutral position. Also, since the roller in the reverse shift fork fits into the groove of the No. 1 gear shift fork shaft at the same time, the reverse shift fork does not move.
| *1 | Roller (No. 1 Shift Interlock Roller) | *2 | Reverse Shift Fork |
| *3 | No. 3 Gear Shift Fork | *4 | No. 1 Gear Shift Fork Shaft |
When the shift lever is moved to R, the reverse shift fork moves to the left using the snap ring connected to the reverse shift fork shaft and engages the reverse gear.
| *1 | Snap Ring | *2 | Reverse Shift Fork Shaft |
| *3 | Reverse Shift Fork | - | - |
Reverse Mis-shift Prevention Mechanism
This mechanism is designed to prevent directly shifting to reverse from 5th gear while driving.
When shifting to reverse, the shift lever is momentarily moved back to N before shifting is performed.
| *1 | Transmission Shift Lever Assembly | *2 | Shift and Select Lever Shaft |
| *3 | Shift Lever Housing | *4 | Spring |
| *5 | No. 2 Reverse Restrict Pin | - | - |
|
Engine Side |
|
Shift Lever Housing Movement Direction |
When the shift lever is moved towards 5th and R, the shift lever housing rotates and pushes down the No. 2 reverse restrict pin.
When the shift lever is moved completely to 5th, the shift lever housing slides backward. This backward movement prevents the No. 2 reverse restrict pin from contacting the shift lever housing and allows the pin to move back to its initial position using the force of the spring.
When trying to move the shift lever from 5th directly to R, the shift lever housing contacts the No. 2 reverse restrict pin, preventing an erroneous shift operation into reverse.