Home › Drivetrain › H150F MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSMISSION SYSTEM
NM25T0E _52 Drivetrain _030652 H150F MANUAL TRANSMISSION / TRANSAXLE _0138330 MANUAL TRANSMISSION SYSTEM DE DETAILS F

H150F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION SYSTEM  DETAILS  OIL PUMP  


CONSTRUCTION


a.

A trochoid gear type oil pump that forcibly lubricates the bearings and synchromesh mechanism through forced lubrication is used. Under various usage conditions, a sufficient amount of lubrication is ensured, improving durability.


b.

During lubrication, the oil slung up from each gear is transferred to inside the transfer adapter via the large-sized oil receiver installed to the manual transmission case. This oil is sucked up from the strainer via the oil pump and sent to the hole of the output shaft. The pumped oil is discharged from the inside of the output shaft to each shaft gear hole in order to lubricate the cone side for the synchromesh mechanism and bearing and oil seals.

X123521C01
3.052,4.51 3.698,3.646 false 3.729,2.708 4.698,3.073 false 5.771,1.688 6.167,1.958 false 5.688,1.219 6.094,0.885 false 3.646,3.469 3.958,3.625 0.313,0.156 10 false *1 4.74,3.01 5.052,3.167 0.313,0.156 10 false *2 6.198,1.906 6.51,2.063 0.313,0.156 10 false *3 6.135,0.781 6.448,0.938 0.313,0.156 10 false *4
*1 No. 1 Oil Receiver Pipe *2 Manual Transmission Oil Strainer Sub-assembly
*3 Manual Transmission Oil Pump Drive Rotor *4 Manual Transmission Oil Pump Driven Rotor
V100136

Engine Side - -