CONSTRUCTION
A rear stabilizer bar is provided depending on the model to achieve both rolling rigidity and operational stability.
A 20 mm or 25 mm diameter solid type rear stabilizer bar with an optimized layout is used depending on the model.
A rear stabilizer bush is positioned between the rear stabilizer bar and rear axle housing.
A rubber bush is used between the rear stabilizer bar and stabilizer link, and a stud type installation method is used for the stabilizer link and frame.
| *1 | Stabilizer Link Sub-assembly | *2 | Rear Stabilizer Cushion |
| *3 | Rear Stabilizer Bar | *4 | Rear Stabilizer Bush |
| *a | A - A Cross Section | *b | B - B Cross Section |