OUTLINE
Front Axle
A tapered roller bearing is used.
A sensor rotor is positioned in the front axle hub sub-assembly for models with ABS.
A free wheel hub or dual mode automatic locking hub is provided depending on the model.
| *1 | Speed Sensor | *2 | Sensor Rotor |
| *3 | Tapered Roller Bearing | *4 | Front Axle Hub Sub-assembly |
| *1 | Tapered Roller Bearing | *2 | Free Wheel Hub Assembl |
| *1 | Tapered Roller Bearing | *2 | Dual Mode Automatic Locking Hub (Free Wheel Hub Assembly) |
Rear Axle
A tapered roller bearing is used.
A sensor rotor is positioned in the rear axle hub and bearing assembly for models with ABS.
| *1 | Rear Axle Housing Assembly | *2 | Rear Axle Shaft |
| *3 | Rear Axle Hub and Bearing Assembly | *4 | Tapered Roller Bearing |
| *1 | Rear Axle Housing Assembly | *2 | Rear Axle Shaft |
| *3 | Rear Axle Hub and Bearing Assembly | *4 | Tapered Roller Bearing |
| *5 | Sensor Rotor | - | - |
PRECAUTION
Free Wheel Hub
Before driving in 4WD (H4 and L4), always set the left and right hubs to the LOCK position. When the drive mode is switched from H2 to H4 or L4 with the hubs free, a strange noise will occur and a malfunction may occur.
Dual Mode Automatic Locking Hub
When switching the hub position, always switch the left and right hubs to the same position. Setting the left and right hubs to different positions may cause a malfunction to occur, which may negatively affect driving and lead to an unforeseen accident.