Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL SYSTEM
NM25T0E _52 Drivetrain _031390 AXLE AND DIFFERENTIAL _0141541 DIFFERENTIAL SYSTEM CO CONTROL F

AXLE AND DIFFERENTIAL  DIFFERENTIAL SYSTEM  CONTROL  DIFFERENTIAL LOCK CONTROL  


FUNCTION OF MAIN COMPONENTS


Component Function
No. 2 Differential Lock Shift Actuator Front Differential Lock Shift Motor Changes the front differential position (lock or free).
Front Differential Lock Limit Switch Detects the front differential lock shift motor operating condition.
Differential Lock Shift Actuator Rear Differential Lock Shift Motor Changes the rear differential position (lock or free).
Rear Differential Lock Limit Switch Detects the rear differential lock shift motor operating condition.
Front Differential Lock Position Switch (No. 4 Transfer Indicator Switch) Detects the front differential position (lock or free).
Rear Differential Lock Position Switch (No. 4 Transfer Indicator Switch) Detects the rear differential position (lock or free).
4WD Detection Switch (No. 1 Transfer Indicator Switch) Detects the transfer shift position.
Differential Lock Control Switch (Center Differential Lock Switch) Selects the front differential and rear differential position (lock or free).
No. 2 4WD Control ECU Controls the differential lock shift motor in the differential lock shift actuator based on the signals from each switch and the vehicle speed signal from the speedometer.
Combination Meter Assembly Speedometer Sends the vehicle speed signal to the No. 2 4WD control ECU.
Front Differential Lock Indicator Light Illuminates or flashes to inform the driver of the front differential position (lock or free).
Rear Differential Lock Indicator Light Illuminates or flashes to inform the driver of the rear differential position (lock or free).


SYSTEM CONTROL


a.

The No. 2 4WD control ECU operates the differential lock shift actuators and differential lock indicator lights in accordance with the conditions of the differential lock control switch (center differential lock switch) and other switches. If the vehicle speed goes above 8 km/h (5 mph), the No. 2 4WD control ECU prohibits shifting of the differential lock shift actuator from the FREE mode to the LOCK mode. The operation of the No. 2 4WD control ECU is as follows:

i.

Shifting from FREE Mode to LOCK Mode

·

When all the following conditions are satisfied, the No. 2 4WD control ECU drives the differential lock shift motor and restricts operation of the differential:

-

The differential lock control switch (center differential lock switch) is in the RR or FR/RR position.

-

The 4WD detection switch (No. 1 transfer indicator switch) is on.

-

The vehicle speed is 8 km/h (5 mph) or lower.


·

When the differential lock control switch (center differential lock switch) is turned to the RR position, only the rear differential is shifted to the LOCK mode.

·

When the differential lock control switch (center differential lock switch) is turned to the FR/RR position, both the front and rear differentials are shifted to the LOCK mode.



ii.

Shifting from LOCK Mode to FREE Mode

·

When one of the following conditions is satisfied, the No. 2 4WD control ECU drives the differential lock shift motor and releases the restriction on operation of the differential.

-

The differential lock control switch (center differential lock switch) is turned to the OFF position.

-

The differential lock control switch (center differential lock switch) is turned from the FR/RR position to the RR position.*

-

The 4WD detection switch (No. 1 transfer indicator switch) is turned off.

HINT:

*: When this occurs, only the front differential is shifted to FREE mode.





iii.

Control of Differential Lock Indicator Light

·

The No. 2 4WD control ECU turns off, blinks or turns on the differential lock indicator lights in accordance with the conditions of the differential lock control switch (center differential lock switch) and differential lock position switches (No. 4 transfer indicator switches) as shown in the following table.

Indicator Light Differential Lock Control Switch Differential Lock Position Switch Differential Condition
Front Rear
Front Differential Lock Indicator Light Off OFF or RR Position Off - Shifted into FREE mode
Blinks* FR/RR Position Off - During shifting into LOCK mode
On FR/RR Position On - Shifted into LOCK mode
Rear Differential Lock Indicator Light Off OFF Position - Off Shifted into FREE mode
Blinks* RR or FR/RR Position - Off During shifting into LOCK mode
On RR or FR/RR Position - On Shifted into LOCK mode

HINT:

*: When the No. 2 4WD control ECU prohibits shifting into LOCK mode because the vehicle speed is above 8 km/h (5 mph), the differential lock indicator light will blink.


·

When the 4WD detection switch (No. 1 transfer indicator switch) is turned off with the differential lock control switch (center differential lock switch) in the RR or FR/RR position, the differential lock indicator light flashes to prevent forgotten operation of the differential lock control switch (center differential lock switch).