CONSTRUCTION
A shift fork slide type is used for 2-4 select and Hi-Lo select.
A 2-4 select switch (transmission control switch) is provided depending on the model. The diaphragm cylinder assembly operates according to switch operation and performs 2-4 shifting.
| *1 | Transfer High and Low Shift Fork Shaft | *2 | No. 2 Transfer Gear Shift Fork |
| *3 | No. 1 Transfer Gear Shift Fork | *4 | Transfer Front Drive Shift Shaft |
| *5 | High and Low Shift Inner Lever Sub-assembly | - | - |
| *1 | Transfer High and Low Shift Fork Shaft | *2 | No. 2 Transfer Gear Shift Fork |
| *3 | No. 1 Transfer Gear Shift Fork | *4 | Transfer Front Drive Shift Shaft |
| *5 | Diaphragm Cylinder Assembly | *6 | High and Low Shift Inner Lever Sub-assembly |
| *1 | No. 1 Vacuum Switching Solenoid (for H2 Shift) | *2 | No. 2 Vacuum Switching Solenoid (for H4 Shift) |
|
To Diaphragm Cylinder Assembly |
|
From Vacuum Tank |