SYSTEM CONTROL
Models Compliant with EURO 4 Emission Regulations
In this system, the high-pressurized fuel that is supplied by the supply pump is stored in the common-rail, and the ECM sends signals to the injectors via the injector driver in order to control the injection timing and injection volume.
Fuel pressure is controlled in accordance with the fuel pumping volume that is controlled by the Suction Control Valve (SCV) in the supply pump assembly. The SCV is controlled by the ECM.
| *1 | Supply Pump Assembly | *2 | Fuel Temperature Sensor |
| *3 | SCV | *4 | ECM |
| *5 | No. 1 Injector Driver | *6 | No. 2 Injector Driver |
| *7 | Common-rail Assembly RH | *8 | Fuel Pressure Sensor |
| *9 | Fuel Cooler (Water-cooled Type) | *10 | Injector Assembly |
| *11 | Fuel Cooler (Air-cooled Type) | *12 | Fuel Filter |
| *13 | Fuel Tank Assembly | *14 | Common-rail Assembly LH |
| *15 | Pressure Limiter | - | - |
| *a | High Pressure Fuel | *b | Return Fuel |
| *c | Suctioned Fuel | - | - |
Models Compliant with EURO 5 Emission Regulations
In this system, the high-pressurized fuel that is supplied by the supply pump assembly is stored in the common-rail assembly, and the ECM sends signals to the injector assemblies via the injector driver in order to control the injection timing and injection volume.
A common-rail assembly with the fuel pressure discharge valve and piezo type injector assembly with maximum injection pressure of 200 MPa are used to improve driveability and reduce Noise and Vibration (NV).
Fuel pressure is controlled in accordance with the fuel pumping volume that is controlled by the Suction Control Valve (SCV) in the supply pump assembly and fuel pressure discharge valve. The SCV is controlled by the ECM. The fuel discharge valve is controlled by the ECM via the injector driver.
| *1 | Supply Pump Assembly | *2 | Fuel Temperature Sensor |
| *3 | SCV | *4 | ECM |
| *5 | No. 1 Injector Driver | *6 | No. 2 Injector Driver |
| *7 | Common-rail Assembly (RH) | *8 | Fuel Pressure Sensor |
| *9 | Exhaust Fuel Addition Injector Assembly | *10 | Injector Assembly |
| *11 | Fuel Pressure Discharge Valve | *12 | Common-rail Assembly (LH) |
| *13 | Pressure Limiter | *14 | Fuel Filter |
| *15 | Fuel Tank Assembly | - | - |
| *a | High Pressure Fuel | *b | Return Fuel |
| *c | Suctioned Fuel | *d | Fuel to Exhaust Fuel Addition Injector Assembly |