OUTLINE
An EGR control is used. This system is designed to reduce and control NOx formation through a slight reduction of peak temperature in the engine combustion chamber, which is accomplished by introducing a small amount of inert gas into the intake manifold.
3 oxidation catalysts are used.*1
An oxidation catalyst is used.*2
In order to comply with emission regulations, a Diesel Particulate Filter (DPF) catalyst is used to effectively collect and purify CO, HC and Particulate Matter (PM) contained in exhaust gas.*2
Due to the use of the DPF, catalyst support control that combusts and purges PM accumulated in the DPF is used for DPF regeneration.*2
An air fuel ratio sensor is used.*2
An air fuel ratio sensor heater control is used. This control maintains the temperature of the air fuel ratio sensors at an appropriate level to increase the detection accuracy of the exhaust gas oxygen concentration.*2
*1: Models compliant with EURO 4 emission regulations
*2: Models compliant with EURO 5 emission regulations