CONSTRUCTION
Models Compliant with EURO 5 Emission Regulations
A water-cooled type EGR cooler assembly is used. In the water-cooled type EGR cooler, engine coolant flows through the 6-layered gas passage to cool down the EGR gas.
An EGR cooler bypass switching valve (No. 2 EGR valve assembly) is used. If EGR gas is cooled down in the EGR cooler with light engine load and low engine coolant temperature, compression air temperature decreases. To prevent this, the EGR gas passage is switched by the EGR cooler bypass switching valve (No. 2 EGR valve assembly). The EGR passage is switched in 2 stages.
| *1 | EGR Cooler Bypass Switching Valve (No. 2 EGR Valve Assembly) | *2 | Valve |
| *3 | Actuator for EGR Cooler Bypass Switching Valve | *4 | EGR Cooler Assembly |
| *5 | EGR Cooler | *6 | Bypass Passage |
| *a | Engine Coolant Outlet | *b | Engine Coolant Inlet |
| *c | A - A Cross Section | *d | EGR Gas Passage |
| *e | Engine Coolant Passage | *f | EGR Cooler Bypass Switching Valve (No. 2 EGR Valve Assembly) Cross Section |
|
EGR Gas |
|
EGR Gas (through EGR Cooler) |
|
EGR Gas (through Bypass Passage) | - | - |