CONSTRUCTION
A planar type air fuel ratio sensor is used.Air Fuel Ratio Sensor
The planar type air fuel ratio sensor uses alumina, which excels in heat conductivity and insulation, to integrate the sensor element with the heater, thus improving the warm-up performance of the sensor.
This sensor is based on a sensor developed for gasoline engines. The cover has been changed for diesel engine application in order to eliminate the influences of the sensor temperature and the PM. This sensor, which is mounted after the DPF, detects the air fuel ratio after the gas has been reduced.
| *1 | Diffusion Resistance Layer | *2 | Alumina |
| *3 | Platinum Electrode | *4 | Heater |
| *5 | Atmosphere | *6 | Sensor Element (Zirconia) |
The air fuel ratio sensor data is approximately proportional to the existing air fuel ratio. The air fuel ratio sensor converts the oxygen density to a current and sends it to the ECM.
As a result, the detection precision of the air fuel ratio has been improved. The air fuel ratio sensor data can be read using an Global TechStream (GTS).