Home › Drivetrain › H152F MANUAL TRANSMISSION / TRANSAXLE › MANUAL TRANSMISSION SYSTEM › from 2016.08
NM25T0E _52 Drivetrain _057926 H152F MANUAL TRANSMISSION / TRANSAXLE _0287974 MANUAL TRANSMISSION SYSTEM GE GENERAL F

H152F MANUAL TRANSMISSION / TRANSAXLE  MANUAL TRANSMISSION SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

An H152F 5-speed manual transmission is used on models with a 1VD-FTV engine.


b.

The layout of the gears and bearings has been optimized. Due to this, load reduction and sufficient capacity for the bearing has been ensured.


c.

An oil pump that can perform forced lubrication is used. Due to this, a sufficient amount of lubrication is ensured from low to high speeds and strength and durability have been ensured.


d.

A closed gear ratio has been used to improve acceleration performance and usability.


e.

Along with a constant mesh type synchromesh mechanism, a helical gear is used for the reverse gear. Due to this, gear noise while driving in reverse has been reduced.


f.

All shift mechanisms and each gear have been installed to the transmission intermediate plate, thereby achieving improved serviceability.



SPECIFICATION


*: Weight shows the figure with the fluid fully filled.

Gear Ratio 1st 4.529
2nd 2.294
3rd 1.490
4th 1.000
5th 0.750
Reverse 4.313
Oil Capacity 2.9 Liters (3.1 US qts, 2.6 Imp. qts)
Oil Viscosity SAE 75W-90
Oil Grade API GL-3 (GL-4)
Weight (Reference)* 80 kg (176.4 lb)