Home › Brake › BRAKE SYSTEM (OTHER) › BRAKE SYSTEM › 2016.08–2017.01
NM25T0E _54 Brake _031098 BRAKE SYSTEM (OTHER) _0140233 BRAKE SYSTEM GE GENERAL F

BRAKE SYSTEM (OTHER)  BRAKE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

The brake booster, brake master cylinder and pedal ratio are optimized to improve brake feel.


b.

A Load Sensing Proportioning & Bypass Valve (LSP & BV) is used to optimize the front and rear braking force distribution according to changes in the load capacity.*

*: Except models for Australia



c.

On models with 1HZ or 1VD-FTV engine, a vacuum pump and vacuum tank are used to ensure the necessary vacuum for brake booster operation. Also, a vacuum warning switch, which detects the vacuum, is provided for the vacuum tank.



SPECIFICATION


Models with 1GR-FE Engine

*1: Models without ABS

*2: Models with ABS

Brake Booster Type Tandem Diaphragm
Size 8.5 in. + 8.5 in.
Brake Master Cylinder Type Lockheed + Lockheed*1
Portless + Lockheed*2
Diameter 23.81 mm (0.94 in.)

Models with 1HZ Engine

*1: Models without ABS

*2: Models with ABS

Brake Booster Type Single Diaphragm
Size 9.0 in.
Brake Master Cylinder Type Lockheed + Lockheed*1
Portless + Lockheed*2
Diameter 23.81 mm (0.94 in.)

Models with 1VD-FTV Engine

*1: Models for General Countries

*2: Models for Australia

Brake Booster Type Single Diaphragm
Size 9.0 in.
Brake Master Cylinder Type Portless + Lockheed*1
Portless + Portless*2
Diameter 23.81 mm (0.94 in.)