CONSTRUCTION
Door Impact Beam
A door impact beam is provided in the front door of 2-door models, and the front door and rear door of 4-door models.
Door impact beams reduce the likelihood of side impacts intruding through the doors.
| *A | 4-door Models Only | - | - |
| *1 | Front Door Impact Beam | *2 | Rear Door Impact Beam |
Under Body
On single cab models for Australia, the following parts are provided to ensure superior collision safety for during a frontal offset collision.
Front Floor Under Reinforcement Sub-Assembly
Front Floor Panel Center
Ladder Structure (Under Body Sub-assembly Front)
| *1 | Front Floor Under Reinforcement Sub-Assembly | *2 | Front Floor Panel Center |
| *3 | Ladder Structure (Under Body Sub-assembly Front) | *4 | Front Floor Plate |
Upper Body
On single cab models for Australia, the following parts are provided to ensure superior collision safety for during frontal and side offset collisions.
Roof Side Rail Reinforcement Outer
Front Pillar Reinforcement Sub-assembly Lower
Rocker Panel Reinforcement No. 2
Center Body Pillar Reinforcement Sub-assembly Upper
Quarter Lock Pillar
Roof Side Rail Sub-assembly
Front Body Pillar Sub-assembly Inner
Cowl Side Panel Sub-assembly
Cab Rear Pillar Panel Inner Lower
| *1 | Roof Side Rail Reinforcement Outer | *2 | Front Pillar Reinforcement Sub-assembly Lower |
| *3 | Rocker Panel Reinforcement No. 2 | *4 | Center Body Pillar Reinforcement Sub-assembly Upper |
| *5 | Quarter Lock Pillar | *6 | Roof Side Rail Sub-assembly |
| *7 | Front Body Pillar Sub-assembly Inner | *8 | Cowl Side Panel Sub-assembly |
| *9 | Cab Rear Pillar Panel Inner Lower | - | - |
Tibia Pad
On single cab models for Australia, a tibia pad is provided to reduce damage to the occupant's lower legs during a frontal offset collision.
| *1 | Dash Panel Insulator Pad No. 2 | *2 | Dash Panel Insulator Pad No. 3 |
| *a | A- A Cross Section | - | - |
Hood Sub-assembly
On models for Australia, the clearance between the hood panel and hard parts such as the intercooler is ensured, and the hood inner panel is shaped vertically to reduce the impact toward the pedestrians during a collision.
| *1 | Hood Panel | *2 | Hood Panel Inner |
| *3 | Intercooler | *4 | Head Impactor |
| *a | A - A Cross Section | *b | Clearance |
Hood Bulge
On models for Australia, the hood air intake guide and hood bulge are provided which help reduce the impact towards the pedestrians during a collision.
| *1 | Hood Air Intake Guide | *2 | Hood Bulge |
| *3 | Hood Air intake Seal | - | - |