CONSTRUCTION
The cab mounts are mounted in order to increase rigidity and minimize the transmission of vibration to the body.
| *A | 2-door Steel Roof Van, Rug Roof Van | *B | 4-door Steel Roof Van |
| *C | 2-door Long Steel Roof Van | - | - |
| *1 | No. 1 Mount | *2 | No. 2 Mount |
| *3 | No. 3 Mount | *4 | No. 4 Mount |
| *5 | No. 5 Mount | *6 | No. 6 Mount |
| *7 | No. 7 Mount | *8 | No. 8 Mount |
| *A | Single Cab Pick-up | *B | Double Cab Pick-up |
| *1 | No. 1 Mount | *2 | No. 2 Mount |
| *3 | No. 3 Mount | *4 | No. 4 Mount |
Floor silencer sheets are used to reduce engine and road noise.
| *A | 2-door Steel Roof Van and Rug Roof Van | *B | 4-door Steel Roof Van |
| *C | Single Cab Pick-up and 2-door Long Steel Roof Van | *D | Double Cab Pick-up |
| *a | Floor Silencer Sheet | - | - |
A hood insulator is provided on the rear of the hood panel depending on the specification. This achieves excellent sound insulation performance.
| *A | Models without 1VD-FTV Engine | *B | Models with 1VD-FTV Engine |
| *1 | Hood Insulator | - | - |
A dash panel insulator outer is provided depending on the specification. This reduces the engine noise leaking into and out of the cabin.
| *1 | Dash Panel Insulator Outer | *2 | Dash Panel |
A dash panel insulator is provided. This insulates and absorbs the engine noise to reduce the engine noise leaking into the cabin.
| *1 | Dash Panel | *2 | Dash Panel Insulator |