Home › Engine / Hybrid System › 1GR-FE (ENGINE CONTROL) › SFI SYSTEM › from 2017.01
NM25T0E _51 Engine / Hybrid System _029291 1GR-FE ENGINE CONTROL _0137811 SFI SYSTEM DE DETAILS F

1GR-FE ENGINE CONTROL  SFI SYSTEM  DETAILS  ELECTRONIC THROTTLE CONTROL SYSTEM-intelligent (ETCS-i) CONTROL  


OPERATION


a.

The ECM drives the throttle control motor by determining the target throttle valve opening in accordance with the respective operating condition.


b.

The ECM controls the throttle to an optimal throttle valve opening that is appropriate for the driving conditions such as the amount of accelerator pedal effort and the engine speed in order to achieve excellent throttle control and comfort in all operating ranges.

W102921E05
0.052,0.104 4.083,0.365 4.031,0.26 10 false - Control Examples during Acceleration and Deceleration - 0.521,0.802 2.167,0.99 1.646,0.188 10 false Vehicle's Longitudinal G 5.792,0.104 7.094,0.292 1.302,0.188 10 false : With control 5.792,0.458 7.094,0.646 1.302,0.188 10 false : Without control 5.385,3.406 5.781,3.594 0.396,0.188 10 false Time 2.313,1 2.479,1.188 0.167,0.188 10 false 0 2.313,2.208 2.479,2.396 0.167,0.188 10 false 0 2.313,3.219 2.479,3.406 0.167,0.188 10 false 0 0.406,1.938 2.302,2.427 1.896,0.49 10 false Throttle Valve Opening Angle 0.781,2.896 1.969,3.385 1.188,0.49 10 false Accelerator Pedal Depressed Angle


c.

The ECM controls the throttle valve in order to constantly maintain an ideal idle speed.


d.

As part of the Active Traction Control (A-TRC), the throttle valve opening is reduced by a demand signal sent from the skid control ECU to the ECM. This demand signal will be sent if an excessive amount of slippage occurs at a drive wheel, thus ensuring vehicle stability and applying appropriate amount of power to the road.*

*: Models with A-TRC



e.

In order to bring the effectiveness of the Vehicle Stability Control (VSC) into full play, the throttle valve angle is regulated through a coordination control with the skid control ECU.*

*: Models with VSC