FUNCTION
Except Models Compliant with EURO 5 Emission Regulations
The ECM calculates the target injection pressure (25 - 177 MPa) based on the engine conditions that are the signals from the accelerator pedal sensor assembly and the crank position sensor.
To control fuel pressure, signals sent to the Suction Control Valve (SCV) of the supply pump assembly regulate the pumping volume, so that the pressure detected by the fuel pressure sensor matches the target injection pressure.
A pressure limiter mechanically relieves the pressure if the internal pressure of the common-rail assembly rises abnormally.
Models Compliant with EURO 5 Emission Regulations
The ECM calculates the target injection pressure (32 MPa to 197 MPa) based on the signals from the accelerator pedal sensor assembly and the crank position sensor.
To control fuel pressure, signals sent to the Suction Control Valve (SCV) of the supply pump assembly to regulate the suction volume, and signals sent to the fuel pressure discharge valve of the common-rail assembly via the No. 1 injector driver to regulate the discharge volume, so that the pressure detected by the fuel pressure sensor matches the target injection pressure.
A pressure limiter mechanically relieves the pressure if the internal pressure of the common-rail assembly rises abnormally.