Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2017.01–2021.07
NM25T0E _58 Vehicle Interior _030630 METER / GAUGE / DISPLAY _0137947 METER / GAUGE SYSTEM GE GENERAL F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  GENERAL  GENERAL  


OUTLINE


a.

2 types of analog display type combination meter assemblies are used.


b.

A meter ECU and a buzzer are enclosed in the combination meter assembly.


c.

A front seat belt warning function is provided on models for G.C.C. countries. If the driver seat belt is not buckled, this system blinks the seat belt warning light and sounds the buzzer as a reminder.


d.

A front seat belt warning function is provided on models for Australia. If the driver or front passenger* seat belt is not buckled, this system illuminates the seat belt warning light and sounds the buzzer as a reminder.

*: Single cab pick-up



e.

A rheostat is used to make changing the brightness of the combination meter possible. The brightness level is changed on the Liquid Crystal Display (LCD) for ODO/TRIP display.

Standard Grade Type
Y204390

HINT:

The diagrams shown above are for describing the new car features. They may differ from the actual design. If the LEDs malfunction, the entire combination meter assembly must be replaced. For details, refer to the Repair Manual.


High Grade Type
Y204364

HINT:

The diagrams shown above are for describing the new car features. They may differ from the actual design. If the LEDs malfunction, the entire combination meter assembly must be replaced. For details, refer to the Repair Manual.