Home › Engine / Hybrid System › 1VD-FTV (EMISSION CONTROL) › EMISSION CONTROL SYSTEM › 2017.09–2019.09
NM25T0E _51 Engine / Hybrid System _029308 1VD-FTV EMISSION CONTROL _0133908 EMISSION CONTROL SYSTEM CO CONTROL F

1VD-FTV EMISSION CONTROL  EMISSION CONTROL SYSTEM  CONTROL  EMISSION CONTROL  


FUNCTION OF MAIN COMPONENTS


a.

The main components of the EGR control are as follows:

Components Function Except EURO 5 EURO 5

○: Applicable

-: Not applicable

ECM Controls the EGR control based on signals from each sensor. ○ ○
EGR Valve Assembly EGR Valve Actuated by the ECM, this valve controls the flow rate of EGR gas. ○ -
EGR Valve Position Sensor Detects the actual amount of the EGR valve opening. ○ -
Electric EGR Control Valve Assembly EGR Valve Actuated by the ECM, this valve controls the flow rate of EGR gas. - ○
EGR Valve Position Sensor Detects the actual amount of the EGR valve opening. - ○
EGR Cooler Assembly Cools EGR gas. ○ ○
EGR Cooler Bypass Switching Valve (No. 2 EGR Valve Assembly) Switches the flow passage of EGR gas in 2 stages. - ○
Accelerator Pedal Sensor Assembly Detects the amount of pedal effort applied to the accelerator pedal.
For details, see the ENGINE CONTROL (1VD-FTV) section.
○ ○
Crank Position Sensor Detects the engine speed.
For details, see the ENGINE CONTROL (1VD-FTV) section.
○ ○
Intake Mass Air Flow Meter Sub-assembly Air Flow Meter Detects the intake air mass and flow rate.
For details, see the ENGINE CONTROL (1VD-FTV) section.
○ ○
Atmospheric Temperature Sensor Detects the atmospheric temperature.
For details, see the ENGINE CONTROL (1VD-FTV) section.
○ ○
Engine Coolant Temperature Sensor Detects the engine coolant temperature. ○ ○
Turbo Pressure Sensor Detects the intake manifold pressure.
For details, see the ENGINE CONTROL (1VD-FTV) section.
○ ○
Throttle Control Motor Actuated by the ECM, this valve controls the flow rate of EGR gas. ○ ○


b.

The main components of the catalyst support control are as follows:

Components Function Except EURO 5 EURO 5

○: Applicable

-: Not applicable

ECM Controls the catalyst support control based on signals from each sensor. - ○
Exhaust Gas Temperature Sensor Detects the exhaust gas temperature. - ○
No. 2 Exhaust Gas Temperature Sensor - ○
No. 3 Exhaust Gas Temperature Sensor - ○
Differential Pressure Sensor
·

Monitors the differential pressure before and after the DPF to detect whether the DPF is clogged.

·

Compares this data with the PM accumulation amount calculated by the ECM. If there is a large deviation in the comparison result, the ECM corrects the PM accumulation amount.


- ○
Exhaust Fuel Addition Injector Assembly Injects fuel into the fuel injection passage of the cylinder head sub-assembly. - ○
Air Fuel Ratio Sensor Detects the oxygen concentration in exhaust gas. - ○



FUNCTION


a.

The main function of the emission control system is as follow:

System Outline Except EURO 5 EURO 5

○: Applicable

-: Not applicable

EGR Control This system is designed to reduce and control NOx formation due to a slight reduction of peak temperature in the engine combustion chamber, which is accomplished by introducing a small amount of inert gas into intake manifold.
Based on the signals received from the sensors, the ECM determines the EGR volume via the EGR valve and throttle valve in accordance with the engine condition.
○ ○
Catalyst Support Control
·

When an extremely large amount of PM is accumulated in the DPF, the back pressure of the engine increases and the PM is combusted at once, potentially damaging the filter. In order to prevent that, it is necessary to forcibly combust the accumulated PM. Therefore, the accumulated PM is combusted by increasing the temperature of the filter.

·

If the temperature of the DPF does not increase and the PM keeps accumulating in the DPF, the DPF warning light illuminates or blinks to notify the driver.

·

The amount of accumulated PM is displayed on the DPF indicator in the combination meter assembly.


- ○
Air Fuel Ratio Sensor Heater Control Maintains the temperature of the air fuel ratio sensors at an appropriate level to increase the detection accuracy of the exhaust gas oxygen concentration. - ○