OUTLINE
The 1VD-FTV TOYOTA Direct injection 4 stroke common-rail Diesel engine (D-4D) is a V8 4.5 liter, 32-valve DOHC, turbocharged diesel engine with an intercooler. This engine uses the direct injection system and common-rail system to achieve high performance, clean emissions, low noise and low vibration.
SPECIFICATION
|
*1: Models compliant with EURO 4 emission regulations and models compliant with EURO 5 emission regulations *2: Models non-compliant with emission regulations *3: Emission regulations differ by country and region. *4: Weight shows the figure with the oil and water fully filled. *5: Models compliant with EURO 4 emission regulations *6: Models compliant with EURO 5 emission regulations |
|||
| Engine Type | 1VD-FTV | ||
| No. of Cyls. and Arrangement | 8-cylinder, V type | ||
| Valve Mechanism | 32-valves, DOHC, Chain and Gear Drive | ||
| Combustion Chamber | Direct Injection Type | ||
| Manifolds | Cross-flow | ||
| Fuel System | Common-rail Type | ||
| Displacement | 4461 cm3 (272.2 cu. in.) | ||
| Bore x Stroke | 86.0 x 96.0 mm (3.39 x 3.78 in.) | ||
| Compression Ratio | 16.8 : 1 | ||
| Max. Output (EEC) | 151 kW @ 3400 rpm*1 | ||
| 146 kW @ 3300 rpm*2 | |||
| Max. Torque (EEC) | 430 N*m @ 1200 to 3200 rpm | ||
| Valve Timing | Intake | Open | 2° BTDC |
| Closed | 17° ABDC | ||
| Exhaust | Open | 51° BBDC | |
| Closed | 2° ATDC | ||
| Firing Order | 1 - 2 - 7 - 3 - 4 - 5 - 6 - 8 | ||
| Fuel Cetane Number | 50 (Cetane Index 45) or higher | ||
| Emission Regulation*3 | - | ||
| EURO 4 | |||
| EURO 5 | |||
| Engine Service Mass (Reference)*4 | 352 Kg (776.0 lb)*2 | ||
| 357 Kg (787.0 lb)*5 | |||
| 359 Kg (791.5 lb)*6 | |||
MAIN FEATURES
The 1VD-FTV engine has been able to achieve the following performance through the use of the items listed below.
(1) High performance and fuel economy
(2) Low noise and vibration
(3) Lightweight and compact design
(4) Good serviceability
(5) Clean emissions
| Item | (1) | (2) | (3) | (4) | (5) | |
|---|---|---|---|---|---|---|
|
*1: Models compliant with EURO 4 emission regulations *2: Models compliant with EURO 5 emission regulations *3: Except models compliant with EURO 5 emission regulations ○: Available -: Not Available |
||||||
| Engine Mechanical | The cylinder head cover sub-assembly is made of plastic and cylinder head sub-assembly is made of aluminum alloy. | ○ | - | ○ | - | - |
| A cylinder block sub-assembly made of compact graphite iron is used. | - | ○ | ○ | - | - | |
| A piston provided in the combustion chamber is used in conjunction with the use of direct injection. | ○ | - | - | - | ○ | |
| The piston skirt is coated with resin. | ○ | - | - | - | ○ | |
| The passage for the EGR control is provided in the cylinder head sub-assembly. | - | - | ○ | - | ○ | |
| The plastic region tightening bolt is used in the connecting rod sub-assembly. | - | - | ○ | - | - | |
| The crankshaft pulley uses a torsional damper. | - | ○ | - | - | - | |
| Valve lash adjuster assemblies are used. | ○ | ○ | - | ○ | - | |
| No. 1 valve rocker arm sub-assemblies are used. | ○ | - | - | - | ○ | |
| Cooling System | TOYOTA Genuine Super Long Life Coolant (SLLC) is used. | - | - | - | ○ | - |
| Intake and Exhaust System | The rotary solenoid motor type throttle control motor and a non-contact throttle position sensor are used in the throttle body assembly. | - | - | - | - | ○ |
| A variable nozzle vane type turbocharger sub-assembly and high efficiency intercooler are used. | ○ | - | ○ | - | ○ | |
| An air-cooled type intercooler assembly is used. | ○ | - | - | - | ○ | |
| Emission Control System | The linear solenoid type EGR valve assembly is used.*1 | - | - | - | - | ○ |
| The DC motor type electric EGR control valve assembly is used.*2 | - | - | - | - | ○ | |
| A water-cooled type EGR cooler assembly is used.*1 | - | - | - | - | ○ | |
| A water-cooled type EGR cooler assembly with bypass is used.*2 | - | - | - | - | ○ | |
| 3 oxidation catalysts are used.*1 | - | - | - | - | ○ | |
| An oxidation catalyst and a Diesel Particulate Filter (DPF) catalyst are used.*2 | - | - | - | - | ○ | |
| Fuel System | HP4 type supply pump assembly is used. | ○ | ○ | ○ | - | - |
| A common-rail type fuel injection system is used. | ○ | ○ | ○ | - | - | |
| Solenoid type injector assemblies on which compensation value and Quick Response (QR) code are printed are used.*3 | ○ | ○ | - | - | ○ | |
| Piezo type injector assemblies on which compensation value and Quick Response (QR) code are printed are used.*2 | ○ | ○ | - | - | ○ | |
| A fuel filter, in which the fuel filter element alone can be replaced, is used. | - | - | - | ○ | - | |
| A fuel filter warning switch that detects the clogging of the fuel filter is used. | - | - | - | ○ | - | |
| 2 Fuel coolers are used.*3 | ○ | - | - | - | ○ | |
| Serpentine Belt Drive System | A serpentine belt drive system is used. | - | - | - | ○ | - |
| Engine Control System | An intake mass air flow meter sub-assembly is used. | - | - | - | - | ○ |
| The non-contact sensor is used in the accelerator pedal sensor assembly and throttle position sensor. | ○ | - | - | - | - | |
| A pilot injection control system is used. | ○ | ○ | - | - | ○ | |