Home › Vehicle Interior › METER / GAUGE / DISPLAY › METER / GAUGE SYSTEM › 2021.07–2022.09
NM25T0E _58 Vehicle Interior _030630 METER / GAUGE / DISPLAY _0137947 METER / GAUGE SYSTEM DE DETAILS F

METER / GAUGE / DISPLAY  METER / GAUGE SYSTEM  DETAILS  COMBINATION METER  


FUNCTION


a.

Buzzer Function

i.

The table below shows the warning and reminder functions of the buzzer in the combination meter assembly:

Item
·

Speed Warning

·

Driver Seat Belt Warning

·

Front Passenger Seat Belt Warning

·

Light Reminder

·

Key Reminder

·

Parking Brake Unreleased Warning

·

Engine Coolant High Temperature Warning

·

Brake Fluid Low Warning

·

Sedimenter Warning

·

Check Engine Warning

·

DPF Warning

·

Turn Signal/Hazard Warning Operation



HINT:

The buzzer function differs by vehicle specification.




b.

Rheostat Function

i.

A rheostat function is provided.


ii.

The brightness is changed via the rheostat adjustment display on the LCD. The rheostat adjustment display can be displayed when the TAIL relay is on.


iii.

When the ODO/TRIP switch is pressed and held while the rheostat adjustment display is shown on the LCD, the brightness changes one step every second. Releasing the ODO/TRIP switch when the desired brightness is reached sets the brightness at that level.

Y167904E01
4.438,1.948 6.01,2.135 1.573,0.188 10 false Luminance Ratio 50 % 4.417,0.896 5.99,1.083 1.573,0.188 10 false Luminance Ratio 75 % 1.271,0.896 2.844,1.083 1.573,0.188 10 false Luminance Ratio 100 % 3.438,0.375 3.677,0.563 0.24,0.188 10 false *a 6.813,1.104 7.052,1.292 0.24,0.188 10 false *a 3.469,1.438 3.708,1.625 0.24,0.188 10 false *a 0.177,1.063 0.417,1.25 0.24,0.188 10 false *a 1.271,1.958 2.844,2.146 1.573,0.188 10 false Luminance Ratio 25 % 0.125,2.51 3.865,2.729 3.74,0.219 10 false *a: Pressing the ODO/TRIP switch for 1.0 seconds or more.



c.

Front Seat Belt Warning Function (Models with Front Seat Belt Warning Function for G.C.C. Countries)

i.

When the ignition switch is ON, this system detects the condition of the seat belt based on the signals from the driver seat belt buckle switch.


ii.

When the seat belt is unbuckled, the buzzer sounds 5 times 1.8 seconds after the ignition switch is turned on. The buzzer sounds only 1 time when the vehicle speed exceeds 20 km/h (12.4 mph) to remind the fact that the seat belt is unbuckled. After 24 seconds, the buzzer sounds intermittently to emphasize the fact that the seat belt is unbuckled. After 6 seconds, the sound changes for emphasis. The sound continues for 90 seconds. Once a buzzer begins to sound, it will continue until the seat belt is buckled or the ignition switch is turned off.



d.

Front Seat Belt Warning Function (Models with Front Seat Belt Warning Function except for G.C.C. Countries)

i.

When the ignition switch is ON, this system detects the condition of the seat belts based on the signals from the driver and front passenger* seat belt buckle switches and the occupant detection sensor*.

*: Models with front passenger seat belt warning function



ii.

The buzzer sounds when the vehicle speed exceeds 20 km/h (12.4 mph) to emphasize the fact that the seat belt is unbuckled. After 24 seconds, the sound changes for emphasis. The sound continues for 100 seconds. Once a buzzer begins to sound, it will continue until the seat belt is buckled or the ignition switch is turned off.


iii.

Occupant Detection Sensor*

·

The occupant detection sensor, which is enclosed in the seat cushion of the front passenger seat, is used to detect whether or not the front passenger seat is occupied.

·

This sensor consists of a construction in which 2 electrode sheets sandwich a spacer. When the occupant is seated, the electrode sheets come in contact with each other through the hole provided in the spacer portion, thus enabling the current to flow.

·

Thus, the sensor detects whether or not an occupant is seated in the front passenger seat.


*: Models with front passenger seat belt warning function